SSThunder Posted March 24, 2007 Report Share Posted March 24, 2007 I've got the wires connect just like the directions say but the X16 gauge is only showing dashes(which means it's not receiving a signal from the LC-1). I grounded the white and green ground to 1 of the 2 grounds on the firewall. I ground the blue ground to the other firewall ground. The gauge is coming on but says it's not getting a signal from the LC-1 What did I miss? Quote Link to comment Share on other sites More sharing options...
chpspecial Posted March 24, 2007 Report Share Posted March 24, 2007 Is the stereo jack wire pluged in from the A/F ratio sender to the gauge? and make sure that the butt plug is in on the input side of the sensor Quote Link to comment Share on other sites More sharing options...
SSThunder Posted March 25, 2007 Author Report Share Posted March 25, 2007 I connected the 2.5 mini connector to the OUT of the LC-1 to the IN of the X-16 gauge. There isn't anything connected to the OUT of the x-16 guage or IN of the LC-1. Does there need to be? The setup came with a 2.5 to serial connection for connecting the gauge to a laptop. Do I need to hook this up? Thanks, Jeremy Quote Link to comment Share on other sites More sharing options...
Holty Posted March 25, 2007 Report Share Posted March 25, 2007 you HAVE to have the little stereo plug connected to the OUT of the XD-16 or it will not work. Quote Link to comment Share on other sites More sharing options...
SSThunder Posted March 25, 2007 Author Report Share Posted March 25, 2007 you HAVE to have the little stereo plug connected to the OUT of the XD-16 or it will not work. Ok. I'll do that. I thought it only had to be hooked up if I wanted to hook the gauge up to my laptop. Thanks Quote Link to comment Share on other sites More sharing options...
Holty Posted March 25, 2007 Report Share Posted March 25, 2007 let us know how it turns out Quote Link to comment Share on other sites More sharing options...
SSThunder Posted March 25, 2007 Author Report Share Posted March 25, 2007 It's working now. I some how missed the 1st step Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.