Vortech + AS+M long tubes for $3749.99!

[tbyrne]

We are offering the satin finish 4.8, 5.3 and 6.0 Vortech truck supercharger with a set of AS+M long tube headers for $3749.99. Add $250. if you would like to go with the polished instead. This is a very good way to bolt-on over $125 horsepower.

 

 

The Vortech supercharging system for the 4.8/ 5.3/6.0 GM light truck will impress you with the obvious attention to detail and fully integrated appearance. Increase your horsepower to 391 and torque to 420 ft/lbs (5.3 Engines) to help you pull you, your passengers and your toys over the hill or around the corner.

 

Includes V-2 SQ S-Trim supercharger

Satin or Polish finish

Hand-held programmer controls ignition timing and fuel enrichment

OEM style cast aluminum supercharger mounting bracket

Cast aluminum discharge tube with Bosch compressor bypass valve

Molded inlet duct retains stock air box and MAF locations

Oil drain, oil feed, and air intake assemblies

 

The Vortech supercharging system for the 2002 4.8 GM light truck will impress you with the obvious attention to detail and fully integrated appearance. Increase your horsepower from 275 to 371 and torque from 290 to 377 ft/lbs to help you pull you, your passengers and your toys over the hill or around the corner. Please note that Vortech does not offer programming for alternatively fueled vehicles (trucks with a Z in the 8th digit of the VIN).

 

The Vortech supercharging system for the 2003 5.3 GM light truck will impress you with the obvious attention to detail and fully integrated appearance. Increase your horsepower to 370 and torque to 406 ft/lbs to help you pull you, your passengers and your toys over the hill or around the corner. Please note that Vortech does not offer programming for alternatively fueled vehicles (trucks with a Z in the 8th digit of the VIN).

 

The Vortech supercharging system for the 2002-2003 6.0 GM light truck will impress you with the obvious attention to detail and fully integrated appearance. Increase your horsepower from 300 to 415 and torque from 360 lb./ft. to 447 lb./ft. to help you pull you, your passengers and your toys over the hill or around the corner. Please note that Vortech does not offer programming for alternatively fueled vehicles (trucks with a Z in the 8th digit of the VIN).

 

The Vortech supercharging system for the 6.0 Cadillac Escalade and GMC Denali will impress you with the obvious attention to detail and fully integrated appearance. Increase your horsepower from 345 to 465 and torque from 380 lb./ft. to 494 lb./ft. to help you pull you, your passengers and your toys over the hill or around the corner. Please note that Vortech does not offer programming for alternatively fueled vehicles (trucks with a Z in the 8th digit of the VIN).

 

 

 

Arizona Speed and Marine has taken the time to ensure that these are the best headers for the newest GM truck. Extreme effort was put forth towards proper fitment, durability, and performance. They have produced gains of 22 horsepower and 25 ft./lbs. of torque on a stock 5.3L V-8. These exhaust headers are designed to work with all three V-8 engines; 4.8L, 5.3L and 6.0L. They will work on both two and four wheel drive. Features: 4.8L, 5.3L and 6.0L application; 1 3/4" Primary Tubes; HPC Ceramic Coated; Emissions Compatible; Laser cut flanges for accurate gasket seal; Includes headers, gaskets, bolts, and installation instructions. ** Does require some installation welding as documented in the installation instructions.

 

Orders can be placed online or by calling 1-877-4-TBYRNE.

 

Have a good day,

Tom