wildhawker Posted April 24, 2007 Report Share Posted April 24, 2007 Well, box #1 of 2 showed up today. In it was the pipe portion of the Corsa #14240 exhaust system (Corsa Sport for 6.0L 1500 Classic Crew). After pulling it all out, all I can say is- damn! I'm so ready for Mr. Sawzall tomorrow when the muffler shows up. 3:00PM sharp, I'm on my way to a friends place to make the swap. Now, if I can find my Sony digital voice recorder, maybe I can take some sound clips before and after... I'll see what I can do. Someone will have to help me put up sounds here, I'm clueless in such ways. So, because I simply cannot wait another minute, here's two pics of the kit so far. Quote Link to comment Share on other sites More sharing options...
gs430 Posted April 24, 2007 Report Share Posted April 24, 2007 Those are nice I got my sport exhaust put on last week.I like the sound,not like old daul flow master setup I use to have. Quote Link to comment Share on other sites More sharing options...
Jond983 Posted April 24, 2007 Report Share Posted April 24, 2007 yeah you'll love the corsa nice and raspy @ WOT and stock like quiet @ crusing speeds Quote Link to comment Share on other sites More sharing options...
2006SilverSS Posted April 24, 2007 Report Share Posted April 24, 2007 I've got to say that the Corsa is definitely a great system. It sounds good at WOT and quiet at freeway speeds. Quote Link to comment Share on other sites More sharing options...
vmax2fast Posted April 24, 2007 Report Share Posted April 24, 2007 I've got to say that the Corsa is definitely a great system. It sounds good at WOT and quiet at freeway speeds. The best of both worlds!!! Quote Link to comment Share on other sites More sharing options...
Krambo Posted April 24, 2007 Report Share Posted April 24, 2007 My favorite tips! Nice choice. Quote Link to comment Share on other sites More sharing options...
Black2003SS Posted April 24, 2007 Report Share Posted April 24, 2007 You wont be disappointed... Quote Link to comment Share on other sites More sharing options...
Coda Posted April 25, 2007 Report Share Posted April 25, 2007 god da*m i wish my tips still looked that good..... Quote Link to comment Share on other sites More sharing options...
wildhawker Posted April 25, 2007 Author Report Share Posted April 25, 2007 Well, she went on today. One hour later, and it was time to fire-up. I had my buddy stand about 10 feet back off the right side as I brought it up slowly from idle. Idle- nothing spectacular, nice and open, but a mellow note. 1500- nothing much, but a little louder than stock with a slightly deeper tone. 2500- getting pretty full, but manageable (nothing like the old Flows) 3500- "What did you say?" "Kinda loud, might piss the neighbors off!" (good thing I was at HIS place!) Rev to WOT- Holy... He went from unimpressed to, say, a schtuff-eating-grin in about 10 seconds. Me- I'm still smiling! The fit and finish is wonderful, and absolutely no drone at cruise. Exactly what I was going for. Thank you all so much for this GREAT advice. Tomorrow, I'll get my digital voice recorder out and take some clips to post. Until then, time to dream about sweet, raspy exhaust sounds and the soon to be delivered (hopefully?) Outlaw CAI. -Brandon Quote Link to comment Share on other sites More sharing options...
wildhawker Posted April 25, 2007 Author Report Share Posted April 25, 2007 Before and After... Quote Link to comment Share on other sites More sharing options...
Jond983 Posted April 25, 2007 Report Share Posted April 25, 2007 those tips are hot, great choice Quote Link to comment Share on other sites More sharing options...
vmax2fast Posted April 25, 2007 Report Share Posted April 25, 2007 Have fun trying to keep the inside all shiney... I gave up after about three washes Quote Link to comment Share on other sites More sharing options...
wildhawker Posted April 25, 2007 Author Report Share Posted April 25, 2007 Have fun trying to keep the inside all shiney... I gave up after about three washes Next task - mask off the outside and spray the inside of the tips with high-temp black paint... I hate seeing the tubing inside them. Picky, I know. I hear you on the "shiney", but what can you do?! Quote Link to comment Share on other sites More sharing options...
BlackSS04 Posted April 26, 2007 Report Share Posted April 26, 2007 (edited) Next task - mask off the outside and spray the inside of the tips with high-temp black paint... I hate seeing the tubing inside them. Picky, I know. I hear you on the "shiney", but what can you do?! i don't mind cleaning my tips. i clean my rims everyday and do the tips as well. gotta keep em blingin. Edited April 26, 2007 by BlackSS04 (see edit history) Quote Link to comment Share on other sites More sharing options...
Jond983 Posted April 26, 2007 Report Share Posted April 26, 2007 i don't mind cleaning my tips. i clean my rims everyday and do the tips as well. gotta keep em blingin. fa sho Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.