usabodyguard Posted June 11, 2007 Report Share Posted June 11, 2007 ok, as you all know, i have a ecsb NON-SS... right now my suspension mods and tire specs are - 305/35/24's 2inch rear drop shackles, belltech nitro actives x4 front and rear sway bars - belltech now i want to lower this a lottle more, but dont want to wreck anything or ruin the ride or current suspension set up... will i have to get different sway bars for a lower drop.... also i will get rid of the rear shackles too... what kits does anyone recommend?? i want to spend around $600 hopefully installed... anyone??? Quote Link to comment Share on other sites More sharing options...
pimp ss Posted June 11, 2007 Report Share Posted June 11, 2007 check out the mcghauhys kit my truck rides awesome and everything with the 2/3.5 kit and 325/40/22,s they are not 24,s but my tires are pretty big so they are probably about the same size as yours no rubbing issues and no bad ride Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted June 11, 2007 Report Share Posted June 11, 2007 you wont have any rubbing issues, just when parking like i said. if you dont mind a stiff(not harsh) ride: -belltech 3" leafs -belltech lowering springs (2" or 3", depending on how you want the stance) that setup would ride slightly stiffer than stock, and handle MUCH better. because you have wider than stock tires, you cannot tuck your tires up into your fenders during suspension travel. so the higher spring rate of the new springs will help keep you from bottoming out. if you want the most stock-like ride: -2" drop spindles -3" shackle and hanger combo that will be stock spring rates, and will ride very close to stock. it will, however, signifigantly reduce your payload. if thats an issue, you will need some helper bags for the rear. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.