creederado Posted August 14, 2007 Report Share Posted August 14, 2007 BSEr roll pan - properly installed Hidden Hitch- one of the few that fits Prestigiuos pivoting plate frame- isn't working without some modifications standard ball receiver- 9" lenght 2' drop - as you can see is hitting the plate frame It looks like i'm going to either modify the plate frame or buy a basic flip down version. I'm not going to space the trailer hitch down from the frame. anyone have any pics of there set up, is everyone using the standard 9" length? thanks; Quote Link to comment Share on other sites More sharing options...
CaliChevyV8 Posted August 14, 2007 Report Share Posted August 14, 2007 I don't have any advice. But I was thinkin about doin that, I'm not sure anymore though. Quote Link to comment Share on other sites More sharing options...
creederado Posted August 14, 2007 Author Report Share Posted August 14, 2007 I don't have any advice. But I was thinkin about doin that, I'm not sure anymore though. Ther's a few things I can do to make it work but I'm pressed for time. I will prolly just get the cheap flipped down frame. You might not have a problem with your truck because the roll pan might sit slightly higher althought I'm not sure? Quote Link to comment Share on other sites More sharing options...
ChevyMan23 Posted August 15, 2007 Report Share Posted August 15, 2007 I dont have any ideas for ya...without cutting anything...but...where did you get that plate holder?..iv been looking for that one Quote Link to comment Share on other sites More sharing options...
04CHASE Posted August 15, 2007 Report Share Posted August 15, 2007 well the flip down would work but your plate wouldnt be visible. but i have a few ideas, what if you mounted the current flip up bracket you have so it flips down?? or you could pull the brakcet off al together and get some butterfly nitts and bolts and you could use the two bottom hole of the mounting spot on the roll pan and mount them to the top of the plate so the plate would be below the opening for the hitch. Quote Link to comment Share on other sites More sharing options...
bagged7104ss Posted August 16, 2007 Report Share Posted August 16, 2007 I'm in the same boat as you Creederado. I am afraid a flip down plate will not work because all the fiberglass has been cut from the center of the roll pan to get this plate frame to work. http://i64.photobucket.com/albums/h176/bagged71/DSC02524.jpg http://i64.photobucket.com/albums/h176/bagged71/DSC02525.jpg Quote Link to comment Share on other sites More sharing options...
BSER Posted August 16, 2007 Report Share Posted August 16, 2007 turn the tag mount upsidedown and it will work. If you removed to much material for it to be stable go get a 1in strip of stee to reinforce it at the bottom...it has worked well for me. Quote Link to comment Share on other sites More sharing options...
ChevyMan23 Posted August 21, 2007 Report Share Posted August 21, 2007 Any info on the tag holder? Quote Link to comment Share on other sites More sharing options...
KJT13 Posted August 21, 2007 Report Share Posted August 21, 2007 Any info on the tag holder? www.stylinconcepts.com has one Quote Link to comment Share on other sites More sharing options...
ChevyMan23 Posted August 21, 2007 Report Share Posted August 21, 2007 Thanks. I looked there but I didnt see one. Ill check again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.