kissfans03ss Posted August 17, 2007 Report Share Posted August 17, 2007 Does anyone know how the easy exit system works on the ss,apparently when you remove the ignition key the seat moves forward to make it easier for you to get out but mine wants to plant my chest into the steering wheel.Should there be a sensor that stops the seat at a certain position? Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 17, 2007 Report Share Posted August 17, 2007 Does anyone know how the easy exit system works on the ss,apparently when you remove the ignition key the seat moves forward to make it easier for you to get out but mine wants to plant my chest into the steering wheel.Should there be a sensor that stops the seat at a certain position? you should be able to set the exit position by using the exit button located above the driver selection buttons on the driver door just set the seat how you would like it to position itself when the key is removed and then hold down that button till it beeps i think you have to do it with the key on Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted August 17, 2007 Author Report Share Posted August 17, 2007 That part is set.When you get in the truck and put the key in the ignition the memory seat part kicks in and goes to the predetermined setting,when you exit and take the key out the seat moves forward a few inches to help you get out but my seat keeps going till my chest is literally in the steering wheel(to far). Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 17, 2007 Report Share Posted August 17, 2007 That part is set.When you get in the truck and put the key in the ignition the memory seat part kicks in and goes to the predetermined setting,when you exit and take the key out the seat moves forward a few inches to help you get out but my seat keeps going till my chest is literally in the steering wheel(to far). wow mine the back goes forward and the bottom goes back all the way when key is removed and if i hit the exit button while the truck is running it does the same as when the key is removed i dont know if you did this but it took me a month to figure out i could change the Exit seat position Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted August 17, 2007 Author Report Share Posted August 17, 2007 wow mine the back goes forward and the bottom goes back all the way when key is removed and if i hit the exit button while the truck is running it does the same as when the key is removed i dont know if you did this but it took me a month to figure out i could change the Exit seat position Thanks Brandt i will give that a try it might work because i didnt know you could set the exit position for the seats.I posted the same question on the diesel forum and some guy said that his BCM went bad and had to have his seat frame changed. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 17, 2007 Report Share Posted August 17, 2007 No prob Hope that works for you would hate to see you have to change the seat for something like this you can also disable it using your steering wheel controls Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted August 18, 2007 Author Report Share Posted August 18, 2007 This morning i took the info Brandt gave me and resolved the problem,it was just the way the seat exit mode was programed. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 18, 2007 Report Share Posted August 18, 2007 This morning i took the info Brandt gave me and resolved the problem,it was just the way the seat exit mode was programed. glad it worked out for you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.