Chris Dubya Posted August 27, 2007 Report Share Posted August 27, 2007 After 3 hours of adhesive removal and another hour of washing, my VHO got to show off at sunrise today. Wish I would have caught the ass-clown that dinged my front fender well! The only warning a hemi is going to get is tucked above my rear-view mirror: Dirty carbon fiber emblem decal: Anybody know how to get the bottom airdam off??? I really want to paint it and the grill black. Quote Link to comment Share on other sites More sharing options...
6.0sleeperVHO Posted August 27, 2007 Report Share Posted August 27, 2007 (edited) The front air dam/valance isn't that hard to get off of the truck. There are three bolts, left, right, and center. Then there are a series of the push-pin style clips (8 I think). You have to pry the centers of the clips up then squeeze the base to get these to come out, you'll see when you get under there. I'd see about getting a black one off of an '06 or '07 like I did. Then you don't have to worry about the paint chipping or pealing. From the dealership they should run you about $98 or so. Or you can hit up some of the carshows/swap meets and you might get lucky and find a deal on someone elses old one. Either way, good luck. The black def. looks better than the grey every time. Edited August 27, 2007 by 6.0sleeperVHO (see edit history) Quote Link to comment Share on other sites More sharing options...
Bad Bowtie Posted August 27, 2007 Report Share Posted August 27, 2007 See my reply in the Pic's section... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.