Z28ricer Posted January 22, 2004 Report Share Posted January 22, 2004 Anyone got decent measurements of the blower setup vs the stock manifold ? I cant seem to tell if its any taller than the stock one from the pics i've seen, and im hoping it isnt, could someone possibly offer some measurements ? Link to comment Share on other sites More sharing options...
Fun Guy Posted January 22, 2004 Report Share Posted January 22, 2004 Call Magnuson. Link to comment Share on other sites More sharing options...
blownchevy Posted January 22, 2004 Report Share Posted January 22, 2004 What are you trying to do? Link to comment Share on other sites More sharing options...
dcairns Posted January 22, 2004 Report Share Posted January 22, 2004 If you are trying to get a Radix in a Camaro, it has been pretty well established that it won't fit unless you change your hood and make some changes around the firewall that get rid of your windsheild wipers. In other words, the hood is too low and the engine is crammed under the firewall too far. Link to comment Share on other sites More sharing options...
blownchevy Posted January 22, 2004 Report Share Posted January 22, 2004 ^^^what he said^^^ Link to comment Share on other sites More sharing options...
Z28ricer Posted January 22, 2004 Author Report Share Posted January 22, 2004 Thats for 4th gens. I'll be putting a 4.8 into a 92 with a T56 behind it, i already test fit the motor somewhat and it seems the stock intake may clear my stock hood, which im hoping the blower will also, would rather not even run a small cowl as i have plans for a different stock hood scoop on the stock flat hood. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.