03_SS_22 Posted November 19, 2008 Report Share Posted November 19, 2008 specs: Static flow @ 37.95lb/hr @ 43.5PSI / 300KPa (4.31 g/s = 398cc/min) Static flow @ 43.82lb/hr @ 58PSI / 400KPa (4.97 g/s = 460cc/min) * Dynamic flow (2.0ms/10.0 ms(pulse width / rep rate)) 6.0 lb/hr @ 43.5PSI (0.748 g/s @ 300KPa) Coil Resistance: High Impedance / High-Z (Works with factory computer injector drivers) good for 408 n/a motor? Quote Link to comment Share on other sites More sharing options...
misterp Posted November 19, 2008 Report Share Posted November 19, 2008 Hmmm going to depend on heads and cam; a well cammed stock displacement motor can eat-up a set of 42-pounders. Mr. P. Quote Link to comment Share on other sites More sharing options...
03_SS_22 Posted November 19, 2008 Author Report Share Posted November 19, 2008 Hmmm going to depend on heads and cam; a well cammed stock displacement motor can eat-up a set of 42-pounders. Mr. P. I think im going to go with this cam: TSP- Magic Stick V.3 237/242 .603/.609" I am looking at some heads from TSP or Patriot. So how big of injectors should i use? Who would you recommend on getting some heads from? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.