lunaru03 Posted December 5, 2008 Report Share Posted December 5, 2008 Hello guys, I was installing my HID's on my truck but the drivers lights was a little bit more to the floor than the passenger side. when I was aiming them, I noticed that the adjuster went all way out and the light goes completely down. I'm trying tu put the adjuster back, but seems to be that is not engage properly because I still can't rise the light. How can I do to put this s**t back in place to adjust lights ? Thanks in advanced for your help Quote Link to comment Share on other sites More sharing options...
Hrtbeat1 Posted December 7, 2008 Report Share Posted December 7, 2008 Remove the headlight housing and check the bracket. Quite possible that the place where the lower headlight housing tab fits is cracked or broken. I had to replace the passenger side bracket because it was broken where the tab goes. Kinda tedious to replace, there are several 10mm blots and a few torx screws that secure it. The whole front grill has to come off to get to all the bolts/screws. I got a new bracket from the dealership for like $26. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.