Fireman31 Posted January 2, 2009 Report Share Posted January 2, 2009 Quote Link to comment Share on other sites More sharing options...
BigCountry Posted January 2, 2009 Report Share Posted January 2, 2009 hey thanks man i was actually just wondering if there was anyway i could raise it up when i was washing it today Very nice, and on the tips, I was able to loosen the clamp at the rear of the muff and roll the rear section enough to tuck the tips up a little tighter, then just re tighten the clamp. Quote Link to comment Share on other sites More sharing options...
chet Posted January 2, 2009 Author Report Share Posted January 2, 2009 is that a joe gibbs clone? the drop looks great No its a real Joe Gibbs haVery nice, and on the tips, I was able to loosen the clamp at the rear of the muff and roll the rear section enough to tuck the tips up a little tighter, then just re tighten the clamp.Cool ill give that a try Quote Link to comment Share on other sites More sharing options...
slammedbowtie Posted January 3, 2009 Report Share Posted January 3, 2009 damn! that looks sick! nothin like black when its clean lol. man i want to drop mine more now haha Quote Link to comment Share on other sites More sharing options...
haul@ss Posted January 3, 2009 Report Share Posted January 3, 2009 that looks sick bro! hope you are running drop shocks cuz being that low will take a toll on the compressed stock shocks of yours! just a heads up Quote Link to comment Share on other sites More sharing options...
chet Posted January 4, 2009 Author Report Share Posted January 4, 2009 that looks sick bro! hope you are running drop shocks cuz being that low will take a toll on the compressed stock shocks of yours! just a heads up I have nitro 2 on there Quote Link to comment Share on other sites More sharing options...
red04 Posted January 4, 2009 Report Share Posted January 4, 2009 Very nice, looks great. Quote Link to comment Share on other sites More sharing options...
chet Posted January 4, 2009 Author Report Share Posted January 4, 2009 Thanks guys for all the compliments Quote Link to comment Share on other sites More sharing options...
Z06 DREAMING Posted January 4, 2009 Report Share Posted January 4, 2009 That drop is sick!! What components did you use? Quote Link to comment Share on other sites More sharing options...
chet Posted January 5, 2009 Author Report Share Posted January 5, 2009 That drop is sick!! What components did you use? Its all Bell tech the 4/6 drop kit Quote Link to comment Share on other sites More sharing options...
renta Posted January 5, 2009 Report Share Posted January 5, 2009 looks great man!!! did you do anything with your drive shafts? the drop changes the angle, i dropped my s-10 like that and had to shorten the drive shaft almost an inch, i found out the hard way, blown yoke at 50mph, wasnt fun but i took the drive shaft to fleet pride in nc and they cut it and fixed me all up for about 100 bucks, just a little food for thought, keep an eye on it might be fine im sure someone can confirm or deny this, aslo is it awd cause then there may be other problems with the front shafts dont know i was told no more than a 3/3 drop on our trucks anything more and you need to handle the drive shafts, i dont want to alarm you might be fine just something to look into and keep an eye on but def looks real nice sittin low like that Quote Link to comment Share on other sites More sharing options...
chet Posted January 5, 2009 Author Report Share Posted January 5, 2009 looks great man!!! did you do anything with your drive shafts? the drop changes the angle, i dropped my s-10 like that and had to shorten the drive shaft almost an inch, i found out the hard way, blown yoke at 50mph, wasnt fun but i took the drive shaft to fleet pride in nc and they cut it and fixed me all up for about 100 bucks, just a little food for thought, keep an eye on it might be fine im sure someone can confirm or deny this, aslo is it awd cause then there may be other problems with the front shafts dont know i was told no more than a 3/3 drop on our trucks anything more and you need to handle the drive shafts, i dont want to alarm you might be fine just something to look into and keep an eye on but def looks real nice sittin low like that I actually dont know i took it to a shop to have it installed. But its rear whel drive the Joe Gibbs trucks didnt come AWD Quote Link to comment Share on other sites More sharing options...
sdimedude Posted January 10, 2009 Report Share Posted January 10, 2009 That is just a standard cab problem. Extended cabs come with a 2 piece driveshaft that have a slip joint built in. looks great man!!! did you do anything with your drive shafts? the drop changes the angle, i dropped my s-10 like that and had to shorten the drive shaft almost an inch, i found out the hard way, blown yoke at 50mph, wasnt fun but i took the drive shaft to fleet pride in nc and they cut it and fixed me all up for about 100 bucks, just a little food for thought, keep an eye on it might be fine im sure someone can confirm or deny this, aslo is it awd cause then there may be other problems with the front shafts dont know i was told no more than a 3/3 drop on our trucks anything more and you need to handle the drive shafts, i dont want to alarm you might be fine just something to look into and keep an eye on but def looks real nice sittin low like that Quote Link to comment Share on other sites More sharing options...
Jaymz Posted January 10, 2009 Report Share Posted January 10, 2009 looks great Quote Link to comment Share on other sites More sharing options...
OUT2WIN Posted January 12, 2009 Report Share Posted January 12, 2009 Looks sweet......What size tires? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.