brv1102 Posted October 23, 2009 Report Share Posted October 23, 2009 I have an 04 silverado 2wd with a 5.3 and i put ground force shackles and eibach hangars on the rear for a 4 inch total drop and my front is still stock but it sits right about level im wanting to put 2 inch drop spindles on the front and the lower the back 2 more inches, what way would you guys recommend to drop the rear 2 more inches also i have 22'' wheels with 305/45/22 tires im thinking im probly going to have to use a smaller tire also, any size you think would work good with this setup? Quote Link to comment Share on other sites More sharing options...
mightbstock Posted October 23, 2009 Report Share Posted October 23, 2009 You could get some drop leaf springs, and ditch the shackles. that would give you roughly 6"... I think.. Quote Link to comment Share on other sites More sharing options...
Bad Bowtie Posted October 23, 2009 Report Share Posted October 23, 2009 So the frame is already "notched" them correct? Quote Link to comment Share on other sites More sharing options...
brv1102 Posted October 23, 2009 Author Report Share Posted October 23, 2009 So the frame is already "notched" them correct? no i havent notched it yet Quote Link to comment Share on other sites More sharing options...
rivierakid55 Posted October 23, 2009 Report Share Posted October 23, 2009 go back to stock shackles, flip kit/c-notch and then 2 or 3 inch drop spindles up front with a 285/295 on a 35 series tire.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.