JSTAL Posted December 9, 2009 Report Share Posted December 9, 2009 Hpm(danny tranny) 4l65e 2WD /w Yank SC3000. condition=excelent (1800$)+ shipping If i have to separate It will be 1550 for tranny and 650 for the Yank This unit has 7k on it. The tranny works and shifts flawless. If you need to talk to the builder i can get you his number. I dont want to separate the Yank SC3000 from the sale. The Converter still has the free restall from yank if you want it different. this is the billet cover 1000$ converter. Shipping is about 150 on the tranny and 45 on the verter. Specs on the trans are as follows i have the 1-2 bypassed Superior shift kit corvette servo File fit servo pin 1-2 accumulator piston aluminum forward accumulator aluminum rpm spring kit alto red eagle 3/4 clutch pack with 9 clutches and kollen steals alto clutches for all other frictions carbonite wide band with reinforced anchor entire valvebody blueprinted rear slinger planetary ( 4 pinion hardened with reinforced ring) 29 element dual cage input sprag 350 lock up front stator bushing bronze case bushing replaced with babet bushing bleed orifice drilled in input housing blocked third gear accumulator exhaust Beast sunshell New lock up solenoid New shift solenoids New internal wiring harness Trans go separator plate Quote Link to comment Share on other sites More sharing options...
8 UR HMI Posted December 9, 2009 Report Share Posted December 9, 2009 ur missing a motor in that big hole thats a good deal for a tranny (especially a jerry/danny) and a tc. ill call some ppl that are looking for a 65e jason. good luck man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.