8 UR HMI Posted February 2, 2010 Report Share Posted February 2, 2010 this is for the people needing to do a sub/amp combo or a 4 channel combo for powering and running rcas. ok for power wire (with fuse block) this is where u can get ur power. the red box pops open and u can hook it up to this. for ur ignition wire (acc that turns the amp on under the dash is the orange ignition wire. now do NOT run ur rcas and remote the same side as ur power wire which will need to go through the firewall on the drivers side. this is the passenger side. now for mounting ur amp u can put it on the back wall, scrape the paint on the surface of the back hump and screw the ground to it. u should be able to see it in this pic. this is my 4 channel after i took out the zx 1500.1 dont mind the box with fuses, that was my distributor block. u can run the power wire down the panels and behind the left rear panel just a quick little how to help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.