noquema Posted February 3, 2010 Report Share Posted February 3, 2010 does anyone one here know how to unlock our stock gm stereos Quote Link to comment Share on other sites More sharing options...
NTMD8R_SS Posted February 3, 2010 Report Share Posted February 3, 2010 You'll need to take it to a dealer and have it re-programed to your vin# Quote Link to comment Share on other sites More sharing options...
Jordmagg Posted July 23, 2010 Report Share Posted July 23, 2010 Pull the fuse out, then reseat it, then walla, unlocked. Quote Link to comment Share on other sites More sharing options...
vadya0 Posted October 17, 2010 Report Share Posted October 17, 2010 Pull the fuse out, then reseat it, then walla, unlocked. does this work? anybody tried this? Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 17, 2010 Report Share Posted October 17, 2010 Pull the fuse out, then reseat it, then walla, unlocked. this will only work if your unlocking YOUR stock radio as it is already "married" to YOUR trucks vin. If you are replacing the stock radio with another stock readio that has been used, the used radio must be un-married from the previous vehicle it came from before it will allow itself to operate properly. The method of pulling the fuse will only work with the key in the on possition, engine off, and when the engine is ran, key cycled, the radio will revert to the THEFT protection mode again. It is a very simple operation that needs to be done with a techII, but most shops will charge about an hour of labor to do so eventhough it takes about 5 minutes to complete. Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 17, 2010 Report Share Posted October 17, 2010 does this work? anybody tried this? No, at least not long term Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.