AKreizinger Posted April 24, 2010 Report Share Posted April 24, 2010 I have a handheld tuner installed from the previous owner. And earlier this morning I hooked it up and I returned it back to stock, and everything went fine except now the truck won't turn over at all! I hooked it back up and it tells me to put it into the run position and go to the next step but it says it isn't in the run position and I can't get past the 2nd step to see what the problem is! Any help I would appreciate it guys. Would I have to get the computer reprogrammed now? Quote Link to comment Share on other sites More sharing options...
Nscott Posted April 25, 2010 Report Share Posted April 25, 2010 Thats tough to diagnose, might try contacting the company that makes the tuner.... Once it's back to stock, sell that p.o.s. and get it custom tuned http://www.gowheatley.com/ Quote Link to comment Share on other sites More sharing options...
SuperStock Posted April 25, 2010 Report Share Posted April 25, 2010 I would try disconnecting the battery for like 30 seconds, and make sure the battery is fully charged. Quote Link to comment Share on other sites More sharing options...
Ruben525 Posted April 25, 2010 Report Share Posted April 25, 2010 I would try disconnecting the battery for like 30 seconds, and make sure the battery is fully charged. that's what I did and after a day or so the truck did fine Quote Link to comment Share on other sites More sharing options...
SuperStock Posted April 25, 2010 Report Share Posted April 25, 2010 No offence to the plug in programmers but they suck, I had one for awhile and S**t you would be sweating bullets ever time I pluged it in because you didn't know if it was going to freeze. Quote Link to comment Share on other sites More sharing options...
AKreizinger Posted April 25, 2010 Author Report Share Posted April 25, 2010 Thanks guys. I disconnected the battery and it started right up but now it's idling alittle low! But, I agree that the handhelds are garbage trust me I would have never put that in. Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted April 25, 2010 Report Share Posted April 25, 2010 Thanks guys. I disconnected the battery and it started right up but now it's idling alittle low! But, I agree that the handhelds are garbage trust me I would have never put that in. Drive the truck a bit, the idle needs to learn itself since you disconnected the battery..... Quote Link to comment Share on other sites More sharing options...
SuperStock Posted April 25, 2010 Report Share Posted April 25, 2010 I'm glad it worked for you man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.