cline03 Posted October 27, 2010 Report Share Posted October 27, 2010 just got my e fans home from junkyard 200 wire harness and fans off an 05 now i have to figure out how much of this harness i need Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 28, 2010 Report Share Posted October 28, 2010 If you got the complete harness from the junk yard that also controls the lights and what not, it is easier to just swap harnesses out intead of taking the wiring loom apart and getting what you need. Should only take about 2hr. tops to swap out harnesses. Quote Link to comment Share on other sites More sharing options...
cline03 Posted October 28, 2010 Author Report Share Posted October 28, 2010 yea but where do they hookup in the fuse box ? and will i need to wire anything? Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 28, 2010 Report Share Posted October 28, 2010 they come with their own fuse and relay box, replace the entire harness from the front to the distribution box. Just pull out the distribution box, release it and look under it, there are a few block bolted in, unbolt the green one and remove it. Follow it all and then reverse the process with the new one. its fairly simple but you might need another pair of hands to help you fish the new one in. Quote Link to comment Share on other sites More sharing options...
ChinoHillian Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) not to thread jack or anything, but on the black bear website do i buy the dual pin harness w/2005+ OEM Fan Plug - $98 or w/2005+ OEM Fan Plug & Overdrive Alternator Pulley Edited October 28, 2010 by ChinoHillian (see edit history) Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 28, 2010 Report Share Posted October 28, 2010 not to thread jack or anything, but on the black bear website do i buy the dual pin harness w/2005+ OEM Fan Plug - $98 or w/2005+ OEM Fan Plug & Overdrive Alternator Pulley You need the dual pin harness, and as for alt, I would suggest you save your pennies and buy a 145amp alt. instead of getting the overdrive pulley for your stock 105amp alt. The plug depends on the Fans you are running. IF they are oem truck fans, you need the 05+ plug, or if they are the car fans (fbody/corvette) you need the ls1 style plug. Quote Link to comment Share on other sites More sharing options...
ChinoHillian Posted October 29, 2010 Report Share Posted October 29, 2010 thanks man Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.