Jump to content

Shave Tailgate Options


SuperStock

Recommended Posts

I want to get a flip tailgate hadle and or just shave the handel. My question is what are my options to get the tailgate open. I have a truxedo tonneau cover and I do not want to take it off. I have not heard good this about popper to open the tailgate. Just wanted to know what my options were if any.

Link to comment
Share on other sites

I want to get a flip tailgate hadle and or just shave the handel. My question is what are my options to get the tailgate open. I have a truxedo tonneau cover and I do not want to take it off. I have not heard good this about popper to open the tailgate. Just wanted to know what my options were if any.

 

Here you go. 2 - 60lbs soleniod. I have no issues with mine. Works great.

post-14750-63300_thumb.jpg

Edited by Hawkman (see edit history)
Link to comment
Share on other sites

So this is no a popper correct. It just pulls them open not like a popping motion. Do you have a video of it working?

 

Correct not a popper. There are 2 rods in your tailgate. 1 solenoid per rod. I do not have a video. I installed a HEAVY DUTY switch. These sol will pull quite a few amps. The power for the switch comes from the batt wire located at the rear end of the truck. Let's just say a 15 amp hold fuse would not hold the amperage. Here is a link to the solenoids. http://cgi.ebay.com/ebaymotors/PAIR-60-POUND-SHAVED-DOOR-HANDLE-KIT-DOOR-SOLENOID-KIT_W0QQcmdZViewItemQQcategoryZ33696QQihZ016QQitemZ260707709756QQrdZ1QQsspagenameZWDVW

Edited by Hawkman (see edit history)
Link to comment
Share on other sites

With my soft cover on how would I get to the button? Is there a other place I can put the button.

 

I talkng about reaching under the tailgate lip. The opening between your tailgate and bumper or roll pan which ever you have.

Link to comment
Share on other sites

Well you can always put a button anywere you like its just a matter of running the wires. Or if you have a remote start you can run the wires to the brain and hook it to your trunk wire and then you can open the gate with that.

Link to comment
Share on other sites

I have to think about it. Im not sure if i want a button. Or if there is another way I can get my cover open to access an handel from the inside of the tailgate.

 

Well I have a flush fit hard cover so it's easier for me to drop the gate and then lift the cover. If there were a problem were the gate didn't open I can still lift the cover. Have to get my fingers under the lip of cover. I have the intimidator ss wing and didn't want to pry my fingers under the cover everytime I wanted to lift it and risk leaving scratch marks on the wing.

Link to comment
Share on other sites

I think I still have the relocator frame but not the filler plate if you interested in one.I took it back out and made my own frame fort the solenoids. I used the filler plate on my tailgate. Nothing but a curved oval piece of sheet metal that a body man could make for you. If you want it I will look and see if I still have it. I had it powder coated black. Make me an offer. Chris

Link to comment
Share on other sites

All the ideas are good. I dont have an alarm system. I dont reall wanna run poppers or soloniods nor remove my truexdo cover. So sound like to me i'm not getting a relocation handel unless I find another way to get into my cover to open the tailgate. I was thinking I could run a strap and pull on the strap to release the trxedo cover and open the tailgate that way. I just need to find something that will work.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...