rojo_143 Posted May 15, 2011 Report Share Posted May 15, 2011 I have done research but cannot seem to fine right size for rear rotor. Forum is saying 330 mm diameter but every part store i go to says 325mm diameter. Input needed please before i buy! Quote Link to comment Share on other sites More sharing options...
rojo_143 Posted May 16, 2011 Author Report Share Posted May 16, 2011 bump need to know before i buy. please help Quote Link to comment Share on other sites More sharing options...
rojo_143 Posted May 16, 2011 Author Report Share Posted May 16, 2011 no one knows.... Quote Link to comment Share on other sites More sharing options...
Black6spdz Posted May 16, 2011 Report Share Posted May 16, 2011 NAPA # for standard rotor is 48880165 premium is 880165 or have them look them up for the rear of a 02 1500 suburban and they are the same. Quote Link to comment Share on other sites More sharing options...
NTMD8R_SS Posted May 16, 2011 Report Share Posted May 16, 2011 (edited) You probly need the 330mm ask them to look up the part number for a tahoe/burban since they run the dual piston rear calipers like the AWD SS. They probly are looking up the part number for a single piston caliper that came on regular silverados that had disc brakes. Looks like he got you the part #'s ^^^ Edited May 16, 2011 by NTMD8R_SS (see edit history) Quote Link to comment Share on other sites More sharing options...
highvoltamps Posted May 16, 2011 Report Share Posted May 16, 2011 Use 1500 silverado 4WD with 4 wheel steering. I just went through this with the shop putting on the 325mm, messing up the pads. For the dimensions look up Centric 120.66045 premium rotors. Quote Link to comment Share on other sites More sharing options...
rojo_143 Posted May 16, 2011 Author Report Share Posted May 16, 2011 thanks i thought they were the 330's but the autozone guy kept telling me the only part they showed was the 325's Quote Link to comment Share on other sites More sharing options...
moseley618 Posted May 22, 2011 Report Share Posted May 22, 2011 Just did my brakes today. 2003 SS: Rears 13" Fronts 12 13/16. The Russell SS Brake Line Kit Part # RUS-672430 WILL NOT WORK the fittings are a different thread pitch on the front and the center section. It will work for the rears only. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.