bruiser04 Posted August 26, 2011 Report Share Posted August 26, 2011 i did a search to find the metco PN for 100mm idlers and stumbled on these http://www.lightningforceperformance.com/LFP_Lightweight_Aluminum_Idler_Pulley.html just wanna be sure these r the right ones, i have a radix so i can get the spacer from them right? thx in advance Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted August 26, 2011 Report Share Posted August 26, 2011 I like those also and was looking to get them a while back.Are our pillows 90 or 100 NM?, sounds to me that if your running 90mm and you go up to 100 mm you will get more tension on the pillows causing less slippage?. Sent from my Droid using Tapatalk Quote Link to comment Share on other sites More sharing options...
shakesvho Posted August 26, 2011 Report Share Posted August 26, 2011 yes, make sure its the duel bearing type, I think it is, don't forget you need a extra spacer Metco 100mm Idler Pulleys With Extra Idler Spacer #69-90-57-001 Quote Link to comment Share on other sites More sharing options...
T-Bag Posted August 26, 2011 Report Share Posted August 26, 2011 I want that Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted August 26, 2011 Report Share Posted August 26, 2011 Thank you. Sent from my Droid using Tapatalk Quote Link to comment Share on other sites More sharing options...
bruiser04 Posted August 26, 2011 Author Report Share Posted August 26, 2011 yes, make sure its the duel bearing type, I think it is, don't forget you need a extra spacer Metco 100mm Idler Pulleys With Extra Idler Spacer #69-90-57-001 thanks dude Quote Link to comment Share on other sites More sharing options...
bruiser04 Posted August 26, 2011 Author Report Share Posted August 26, 2011 shakes is it the .450 spacer i need ? only one, or two? much appreciated Quote Link to comment Share on other sites More sharing options...
brobradh77 Posted August 27, 2011 Report Share Posted August 27, 2011 You need just one extra for the backside..atleast on mine...the radix brackets are a little diffferent on the newer versions than the old...my puley next to the alt. needed the spacer and some washers becaise the pulley hits...so it may take some modding to make it right. Quote Link to comment Share on other sites More sharing options...
bruiser04 Posted August 27, 2011 Author Report Share Posted August 27, 2011 You need just one extra for the backside..atleast on mine...the radix brackets are a little diffferent on the newer versions than the old...my puley next to the alt. needed the spacer and some washers becaise the pulley hits...so it may take some modding to make it right. i was just doin a search and reading some of ur posts im a lil confused though, i can go with TWO 100mm's right? and is it the .450 spacer from magna and how many do i need and do i need them on both pulleys thx again im tryin to find a full write up on this as i know there is somewhere lol Quote Link to comment Share on other sites More sharing options...
shakesvho Posted August 27, 2011 Report Share Posted August 27, 2011 (edited) you just need one more spacer(you have one on your setup= a total of 2 to upgrade to the 100mm), #69-90-57-001 from magna, I also have the 100mm and did not need any other added washers brad has the richard pulley setup (very nice setup) but I think the 2 washer will do the trick for you like it did for me, its just to pull the pulley out a bit like brad said later -tommy Edited August 27, 2011 by shakesvho (see edit history) Quote Link to comment Share on other sites More sharing options...
brobradh77 Posted August 27, 2011 Report Share Posted August 27, 2011 you just need one more spacer(you have one on your setup= a total of 2 to upgrade to the 100mm), #69-90-57-001 from magna, I also have the 100mm and did not need any other added washers brad has the richard pulley setup (very nice setup) but I think the 2 washer will do the trick for you like it did for me, its just to pull the pulley out a bit like brad said later -tommy Yeah I have the reichard racing 100mm...BUt I recently had to replace one and since they didnt have any more I bought metco,,a newer looking style than those..and I did not put the one by the alternator yet because I am going to have to mod the spacer different;y than just washers..but the style the OP is showing I didnt have the problems I am now. Quote Link to comment Share on other sites More sharing options...
bruiser04 Posted August 28, 2011 Author Report Share Posted August 28, 2011 killer...thanks fellas for the help im gonna order em tonight pics to follow Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.