tbyrne Posted August 7, 2004 Report Share Posted August 7, 2004 SLP is putting together some low cost but high quality rotating assemblies that can be used with GM's LQ9 iron 6.0-liter block. 383 and 402 cubic inch displacements will be available. Here is a quick rundown of what they are producing and what we will have to offer - ZL 383 - low compression - 4.000" 4340 forged steel crankshaft, balanced to rotating assembly 3.899" heavy-duty, high-compression 2618 forged alloy pistons (includes new rings and full-float pin) 6.125" I-beam rods 383-CID displacement 9:1 compression ratio (nominal; ultimate compression ratio will depend upon heads and gaskets used) Designed for forced-induction applications Includes new rod and crank main bearings ZL 383 - high compression - 4.000" 4340 forged steel crankshaft, balanced to rotating assembly 3.899" 2618 forged alloy pistons (includes new rings and full-float pin) 6.125" I-beam rods 383-CID displacement 10.8:1 compression ratio (nominal; ultimate compression ratio will depend upon heads and gaskets used) Designed for naturally aspirated applications Includes new rod and crank main bearings ZL 402 - low compression - 4.000" 4340 forged steel crankshaft, balanced to rotating assembly 3.899" heavy-duty, high-compression 2618 forged alloy pistons (includes new rings and full-float pin) 6.125" I-beam rods 383-CID displacement 9:1 compression ratio (nominal; ultimate compression ratio will depend upon heads and gaskets used) Designed for forced-induction applications Includes new rod and crank main bearings ZL 402 high compression - 4.000" 4340 forged steel crankshaft, balanced to rotating assembly 3.899" 2618 forged alloy pistons (includes new rings and full-float pin) 6.125" I-beam rods 383-CID displacement 10.8:1 compression ratio (nominal; ultimate compression ratio will depend upon heads and gaskets used) Designed for naturally aspirated applications Includes new rod and crank main bearings More details for each of these can be found on our website. Pricing for each kit is $2499.99. We're currently taking pre-orders and should be able to start shipping around the 1st of September. Link to comment Share on other sites More sharing options...
smithl3 Posted September 9, 2004 Report Share Posted September 9, 2004 Tbyrne, Any chance you'll sell the forged pistons seperately, or do you have to get the whole rotating assembly?? Link to comment Share on other sites More sharing options...
tbyrne Posted September 9, 2004 Author Report Share Posted September 9, 2004 I don't think the parts for this will be sold seperately but we do carry the full line of Lunati products. Their pistons have been very popular and are available in a variety of compression ratios. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.