03JUSTIN Posted November 7, 2011 Report Share Posted November 7, 2011 (edited) finally got my front suspension finished today after not having much time to work on it the last few months parts i used djm upper and lower control arms powercoated stock spindles qa1 double adj shocks russell stainless steel brake lines # 672430 they do work on a 03 awd energy suspension sway bar bushings # ens-9-5165R energy suspension end links # ens-9-8121R ebc usr slotted rotors ebc green stuff pads next week ill do the alignment and its on to the rear suspension tru trac rear end cover/girdle qa1 double adj shocks ebc rotors and pads just want to thanks to NORCAL SS for helping me through this Edited November 8, 2011 by 03JUSTN (see edit history) Quote Link to comment Share on other sites More sharing options...
Cramer Posted November 7, 2011 Report Share Posted November 7, 2011 Wow! Nice setup. Damn near the same setup I am going with. What is the part number for the QA1's if you don't mind sharing. I have been researching them and haven't found what I am looking for so I was going to go with the LCA's and modify them to work with the DA QA1's. Also what brand of tie rods are those? I have everything to make a set but the tapered spindle. Quote Link to comment Share on other sites More sharing options...
03JUSTIN Posted November 7, 2011 Author Report Share Posted November 7, 2011 qa1 td507 and you will need two sleeve kits slv750 the tie rods are from ffr fabracation i found them over on gmfullsize Quote Link to comment Share on other sites More sharing options...
NTMD8R_SS Posted November 7, 2011 Report Share Posted November 7, 2011 Bet that thing is goona ride smooth. Quote Link to comment Share on other sites More sharing options...
Cramer Posted November 7, 2011 Report Share Posted November 7, 2011 Thanks for your help! What drop do you have on it? I am staying with a 3" front and a custom rear, so I want to make sure these will still be the right lengths. Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted November 7, 2011 Report Share Posted November 7, 2011 (edited) been down this road many times helped you out also. Hit me up when you get the rear ride height in and ill set you up with the right shock. Like ive done on the sss before front with the double adj. and set at stiffest rebound on the qa1s keep it planted. In rear once you get eye/eye measurements hollar back at me and ill get you the right double adjustable qa1. Edited November 7, 2011 by NORCAL SS (see edit history) Quote Link to comment Share on other sites More sharing options...
Cramer Posted November 7, 2011 Report Share Posted November 7, 2011 Quote Link to comment Share on other sites More sharing options...
03JUSTIN Posted November 12, 2011 Author Report Share Posted November 12, 2011 got it alined the other day finnished the brakes up i just powdercoated the stock ones for now til i put the z06 brakes on that i have had forever but never did anything with.also i just picked up a hydro boost setup out a wrecked 06 truck for 100 bucks i plan to install the tru trac today and rear cover hpoefully will see how that goes it seams like when ever i work on my own stuff at the shop i always get sidetracked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.