NORCAL SS Posted January 10, 2012 Report Share Posted January 10, 2012 This is just a feeler since new baby is coming along looking to get something bigger. Me being 6'4 and having 2 kids will be a tight fit. My wife drives this truck DAILY for the past 3 years here in San Francisco with hills and there is no problem driving it. No issues with truck. If you want somethings that done/streetable with no issues at all this is the truck for you. Oil changed every 3k miles and I bought it with 5500 miles on it in June of 07. Its a 2007 2wd with 23xxx miles. Have well over 22k invested in parts alone (not labor included). Truck runs great NO issues no smoke no nothing. I will be putting a new LT1z cam in this weekend with new blueprinted oil pump/katech timing chain etc. Not sure how long I will have the truck until someone buys it so might as well enjoy it. 28K OBO SMOG IS UP TO PERSON BUYING VEHICLE Exterior Mods $2000 spent All SS badges in black Chrome Bowtie Euro Clear Black Headlights 6000k HIDS on Driving/Fog Lights Rear Led Back up Light Rear Led License Plate Lights Rear Blacked out Reflectors Rear Avalanche 3rd Brake light LED Front/Rear Calipers and Rotors Painted Black SS Emblems on both Front/Rear Calipers Evils Carbon Fiber cowl hood painted to match. Front/rear R1 concepts rotors slotted Front/rear posi quiet pads Interior Mods $3500 spent Custom Katzkin Full Leather Surface Seats Front/Rear Heated Seats Alpine IVA D310 Stereo Polk Momo Mids and Highs Alpine AMP Front seats have headrest tvs with dvd player 35 percent tint over rear windows and 50 over front Aerofoce Interceptor Gauge All Interior Lights Upgraded To LEDs Reclining Rear Seats (yes they go almost all the way back) Truck has sunroof Suspension $3500 spent Front DJM Upper A Arms Kbee Front Coilovers Left Coast 32 Cross Member Addco Front Swaybar Custom Adjustable Front Endlinks Rear Belltech Springs Rear Belltech Street Performance Shocks Custom Adjustable Rear Endlinks Airlift Wirless Air System DJM Swaybar Spohn Panhard Bar Engine $5000 spent PCM 4 LESS 4 INCH fenderwell intake Crank Pulley LT1Z Tune LT1Z Cam Recently installed AI Ported LS2 Heads C6 Oil Pan Conversion Electric Fans Low Temp Thermostat 1 3/4 American Racing Long tubes with 3 inch NON CATTED Y PIPE DMH CUT OUT Added magnaflow 3 inch high flow cat after the cutout to clean up stink. Magnaflow 5x8x18 muffler replacing stock one Transmission $4000 spent FLT Level 6 with Billet output shaft just rebuilt with less than 1200 miles (by vince which used to work at FLT) Yank PTB3600 Stall PCM 4 Less Trans cooler Wheels/Tires $5000 spent 22 inch True Forged Sleepers 285 35 22 Front Pirelli Tires 305 35 22 Rear Pirelli Tires Quote Link to comment Share on other sites More sharing options...
detjoe Posted January 11, 2012 Report Share Posted January 11, 2012 what is the C6 oil pan mod?? sounds cool. Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted January 11, 2012 Author Report Share Posted January 11, 2012 what is the C6 oil pan mod?? sounds cool. due to rod knock issues because of the pickup on the trucks the c6 pan conversion fix takes care of that. Stock pan has bad oiling issue Quote Link to comment Share on other sites More sharing options...
shawnss Posted January 12, 2012 Report Share Posted January 12, 2012 Bump for such a sick TBSS. Hoping to pick one up for the wife this summer. but AWD is a must. GLWS. also can a AWD have this same stance? Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted January 12, 2012 Author Report Share Posted January 12, 2012 no awd cant sit as low. YOu can do it but people run into hub issues Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.