A.Rozell Posted January 30, 2012 Report Share Posted January 30, 2012 So, I want to upgrade my suspension a little to give my 500 poines a place to go. I am going to put the hellwig adjustable sway bar out back, but i'm at a loss on the front. I know the factory is good but I see people say poly upgrqade. Any company sugestions? Or any suggestions on an oversized one with upgraded ends? Also, what company do most of you prefer as far as shocks? I know thats a super tough question sometimes because everyone has a preference but throw anything out there and i'll dig up some more info for myself. Thanks Guys! Quote Link to comment Share on other sites More sharing options...
rickyrick562 Posted January 30, 2012 Report Share Posted January 30, 2012 Alot run belltech shocks that's what im getting Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted January 31, 2012 Report Share Posted January 31, 2012 djm swaybars are nice just a heads up if your interseted just hollar I use them a lot on the sss. shocks belltech street performance Have you though about lowering rear to give it more of a level look. Quote Link to comment Share on other sites More sharing options...
f1ss Posted January 31, 2012 Report Share Posted January 31, 2012 DJM has a nice beefy sway bar setup. You stock height or lowered? I would go for Edelbrock IAS or Bilstein shocks if stock height. Quote Link to comment Share on other sites More sharing options...
A.Rozell Posted January 31, 2012 Author Report Share Posted January 31, 2012 I actually cranked up the torssion bars to make it level but im going to leave at stock height. Does it make a huge deal if the rear is adjustable or is it just if its there or not? Quote Link to comment Share on other sites More sharing options...
stg313 Posted January 31, 2012 Report Share Posted January 31, 2012 I have DJM sway bars on my truck that I got from NORCALSS! Definitely would recommend! Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted January 31, 2012 Report Share Posted January 31, 2012 (edited) the rear djm swaybar actually is the shortest distance one out there. Ie less twist then any other bar. Very easy to install and mounts on rear frame rails which is way less twist then other bars. here is the bar up close. Also the brackets are thicker than any other brand out there. Here is the bar on a customers truck I did. Edited January 31, 2012 by NORCAL SS (see edit history) Quote Link to comment Share on other sites More sharing options...
A.Rozell Posted January 31, 2012 Author Report Share Posted January 31, 2012 Thanks, i'll go look them up. looks like a sweet set-up! Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted January 31, 2012 Report Share Posted January 31, 2012 Thanks, i'll go look them up. looks like a sweet set-up! If you want to save money hit me up I have like 30 sets here lol Quote Link to comment Share on other sites More sharing options...
TXSZ66AVLANCHE Posted February 1, 2012 Report Share Posted February 1, 2012 I fabbed my own using the stock sway bar from my Avalanche, cost me an entire $30 Quote Link to comment Share on other sites More sharing options...
SJ GIO Posted February 25, 2012 Report Share Posted February 25, 2012 how much for a set with out shipping i live in san jose and pick it up Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted February 25, 2012 Report Share Posted February 25, 2012 how much for a set with out shipping i live in san jose and pick it up are you looking at front/rear ? Quote Link to comment Share on other sites More sharing options...
Badkarma Posted February 25, 2012 Report Share Posted February 25, 2012 Thinking of getting these for myself. I cant remember where I saw it, I'm pretty sure it was on here, but isnt there fit issues on trucks with a Corsa exhaust? Quote Link to comment Share on other sites More sharing options...
stg313 Posted February 25, 2012 Report Share Posted February 25, 2012 I had to modify the hell out of my gibson catback to get my rear dim sway to fit on my nnbs........... Quote Link to comment Share on other sites More sharing options...
SJ GIO Posted February 28, 2012 Report Share Posted February 28, 2012 are you looking at front/rear ? rear set Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.