Raffailo Posted May 11, 2012 Report Share Posted May 11, 2012 (edited) You will need to get this from your local GM Dealer. P/N 24221349 - GM Updated Valve Body Spacer Plate and Gasket set. Reason behind replacing this is the factory separator plates had an issue with the checkballs deeply wearing into the plate and sometimes all the way through. My factory transmission had shy over 30k miles on it, and one of the checkballs by the 1-2 accumulator housing had worn a pretty good groove in the plate already. Dont remember the cost, but it wasnt bad. i called GM parts and that part number doesn't come up, dude was a douche bag and didn't want to look into it with out my VIN that i currently don't have on me. but other then this issue that im sure ill get over once i have my VIN number is there anything else that needs revising? since ill be going off the write up step by step. finally im about to have all the parts i need and the time to do it. Thanks. Edited May 11, 2012 by Fuerza_SS (see edit history) Quote Link to comment Share on other sites More sharing options...
2bfast Posted May 14, 2012 Report Share Posted May 14, 2012 Posted this in the wrong section.... PM me with any questions Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.