Jump to content

viper 5704 and xpresskit db-all install help


Recommended Posts

Ok I'm new to the site and appreciate the help. I bought the viper 5704 and the xpresskit db-all for my 06 silverado(wiring should be the same from 03-06). Got everything to work( remote start and alarm). It was good till bout the fourth day. When I went to remote start the truck, it started then died then tried to restart and couldn't start. Took dash apart only to find that the bypass module(replacement on the way) had fried somehow. Any ideas or info why. I was using d2d with virtual tach. And GM 12 t harness so I didn't have to cut in to factory harness but I might install it and splice into factory harness instead when the new module comes in. can anyone help. need to know what wires need to be hooked up for the remote start harness with or without the t harness.ive looked everywhere. even matts how to thread on here.Thank you

Link to comment
Share on other sites

  • 2 weeks later...

theres a second negative output on the brain to trigger a relay to shoot power to the seconf ignition (white wire on truck) and you NEED to HARDWIRE the entire modual. have u noticed that when u unlock only the driver unlocks then u gotta hit it again fast to have the others open?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...