SilveradoVHO Posted August 27, 2012 Report Share Posted August 27, 2012 Ok guys im just about ready to install a new exhaust system in my 05 vho my plan was to put the tsp headers 3/4 primaries and the magnaflow 15840 and its a dual in dual out with a muffler that has an x pipe in it with a rear exit. A couple of questions i have about this exhaust is does anybody have this same exhaust so i can hear a sound clip and some opinions and what else would i have to buy to completely install this set up, would it be legal in the state of Texas or can you put catalytic converters before the resonators and last but not least i prefer to have an exit before or after the rear tires, would it be expensive to later on change them to a side exit, thanks to anybody that answers and sorry for been a newbie but i got to start somewhere right. Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted August 27, 2012 Report Share Posted August 27, 2012 (edited) I'm pretty sure that's the same one I have, it's sounds great, good low rumble at idle, stepping on it will get you some attention quick, it has just a little rasp to it. I've got an idle and rev clip, don't have any drive bys yet. I've got an air intake, but stock headers and cats, the muffles starts right at the back of the cabs and goes to side exit stock looking chrome tips on both sides. There is a little droan in the cab around 60 mph when it shifts to OD but around 65 and up it goes away. Edited August 27, 2012 by Sneakystiffler21 (see edit history) Quote Link to comment Share on other sites More sharing options...
Muggs Posted August 27, 2012 Report Share Posted August 27, 2012 Nice, sounds good! Magna flow makes excellent mufflers, great quality. Quote Link to comment Share on other sites More sharing options...
SilveradoVHO Posted August 27, 2012 Author Report Share Posted August 27, 2012 hey stiffler that sound is awesome man thats exactly what i want but the one im looking at is a rear exit but where did you get yours i want a side exit anyways Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted August 27, 2012 Report Share Posted August 27, 2012 Mine came on the truck, the guy I bought it from said he bought the muffler and the tips separately and had all the stainless piping done at the muffler shop. I don't remember the brand of the tips. They look almost identical to stock SS tips, just polished. Quote Link to comment Share on other sites More sharing options...
SilveradoVHO Posted August 27, 2012 Author Report Share Posted August 27, 2012 so your setup is stock exhaust manifold to stock cats to a dual in dual out magnaflow muffler to custom piping out behind the rear tire Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted August 27, 2012 Report Share Posted August 27, 2012 Correct... All welded. Quote Link to comment Share on other sites More sharing options...
SilveradoVHO Posted August 27, 2012 Author Report Share Posted August 27, 2012 ok thank you thats exactly what i want except for some headers have you ever thought of putting some headers and what is the size of the piping Quote Link to comment Share on other sites More sharing options...
Muggs Posted August 27, 2012 Report Share Posted August 27, 2012 Get JC03SS to put a clip up for ya, he has headers and magnaflow DI/DO muffler on his truck and it sounds mean!! Quote Link to comment Share on other sites More sharing options...
SilveradoVHO Posted August 27, 2012 Author Report Share Posted August 27, 2012 PM sent lets just wait and see Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted August 27, 2012 Report Share Posted August 27, 2012 Long tubes are on my list, just haven't pulled the trigger yet. I want long tubes a cam with a new tune in the near future, right now, all my money is going into upgrading my bass boat. I think the tubing on my current setup is 2.5 in- 3.0 out. Quote Link to comment Share on other sites More sharing options...
Muggs Posted August 28, 2012 Report Share Posted August 28, 2012 ^ ^ I hear ya on the longtubes I'm looking for some myself. Quote Link to comment Share on other sites More sharing options...
Sneakystiffler21 Posted August 28, 2012 Report Share Posted August 28, 2012 Texas speed has a new set out that are much cheaper than the big brands that seem just as well built, I think they were $350 a set? The Cam i'm going with is a Texas Speed so I'll prob get the long tubes when I get the cam. Quote Link to comment Share on other sites More sharing options...
Muggs Posted August 28, 2012 Report Share Posted August 28, 2012 I'll have to check them out, thanks Quote Link to comment Share on other sites More sharing options...
MARTYW Posted August 28, 2012 Report Share Posted August 28, 2012 X2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.