15SilveradoSS Posted November 21, 2012 Report Share Posted November 21, 2012 i cannot seem to dig up to much stuff on here about HID headlights.. should i go with both my high and lows as HID or just the HIghs? thanks Quote Link to comment Share on other sites More sharing options...
2001silverado364 Posted November 21, 2012 Report Share Posted November 21, 2012 Most people just go lows, I have both highs and lows. When you flick the switch to highs it takes them a while to warm up. Also, you can't flash your highs with hids. It's also a great idea to do the four high mod with hids to keep them from constantly switching on and off, when you go from low to high and back. Quote Link to comment Share on other sites More sharing options...
Blown 346 Posted November 21, 2012 Report Share Posted November 21, 2012 (edited) Agreed. I also have both Highs and lows. Like said, do the 4 hi mod. I only use the brights when I know I can have them on for more than a few seconds so I dont burn up the ballasts and bulbs. If you use your brights and have them on more then a minutes or so then its a great addition, otherwise if your brights arent on much dont bother. Edited November 21, 2012 by Blown 346 (see edit history) Quote Link to comment Share on other sites More sharing options...
JF-03-SS Posted November 21, 2012 Report Share Posted November 21, 2012 4 high mod is a must if you're running all 4. Quote Link to comment Share on other sites More sharing options...
diggerdan11 Posted November 21, 2012 Report Share Posted November 21, 2012 I think the 4 High mod is necessary any time you are running HID's. Since it takes time for the HID's to warm up. Before my High 4 mod i was driving at night and it was cold and raining, I ran my highs for a long time, then I came around the corner and there was another car, I switched to my lows and I could not see a thing, and I almost drove off the road at 65 mph. After that I immediately did the High 4 Mod and have not had a problem since. I have HID's in my Highs and Lows, but I would recommend just the lows. Having them in your highs is nice an bright but sometimes its better to have a nice regualr bulb in your highs since it takes time to warm up Quote Link to comment Share on other sites More sharing options...
Sirbutler Posted November 22, 2012 Report Share Posted November 22, 2012 4 high mod? Quote Link to comment Share on other sites More sharing options...
cb2big4u Posted November 22, 2012 Report Share Posted November 22, 2012 4 high mod? Diode in between highs, lows, or even fogs relays so that when you turn on the high beam all of your lights come on and not just highs. Sent from my ADR6425LVW using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.