onebadmax Posted March 19, 2013 Report Share Posted March 19, 2013 Will this be too much for a bolt on, Awd SS? I'm doing a cam later in the summer, but want to go ahead and buy a converter now. What do you guys think? Quote Link to comment Share on other sites More sharing options...
JC03SS Posted March 20, 2013 Report Share Posted March 20, 2013 Sounds like a nice one. When you do you cam make sure it matches up to the converter to get the best out of your setup. Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted March 20, 2013 Report Share Posted March 20, 2013 i tried responding to your PM, but i keep getting a "server error" code and it wont let me send it. but i can do everything else on the site.... anywho, if you end up going with a blower and all that like you mentioned- especially the roots blower i recommended, thats too high of a stall. for a heads/cammed AWD truck or a centrifugal/turbo charged SSS, certain setups would work great with that high of a stall. but for what you asked me about, and what i suggested, i would go more for around a 2600-2800 stall and go with a PI (precision industries), love them never had any issues- great products and even better service by the way, what is your email if i cant get this PM to go through? i have everything all typed up for you i just need another way to get it to you John Quote Link to comment Share on other sites More sharing options...
onebadmax Posted March 20, 2013 Author Report Share Posted March 20, 2013 Waid at metalresearchinc dot com. As far as the blower goes, I will be upgrading the converter and trans at that time. I just want to wake the truck up for the summer. Thank you John. Quote Link to comment Share on other sites More sharing options...
Muggs Posted March 20, 2013 Report Share Posted March 20, 2013 Just curious, which cam are you gonna run? Quote Link to comment Share on other sites More sharing options...
onebadmax Posted March 20, 2013 Author Report Share Posted March 20, 2013 224/230 .612/.612 116 LSA Open to suggestions, would like to have a cam that will work decently both NA and Blown.... Quote Link to comment Share on other sites More sharing options...
Aldofashow Posted March 20, 2013 Report Share Posted March 20, 2013 I'm going n/a I got a yank ss 3200 any bigger and you'll need wings on the side of your truck ready for take off captain LOL Quote Link to comment Share on other sites More sharing options...
onebadmax Posted March 20, 2013 Author Report Share Posted March 20, 2013 Ahh man, I want to get into the 8.50s this summer. I know a higher stall will help me attain that goal. I feel like if I went with a 3200 I would be leaving too much on the table. LOL what does your truck run and what all is done to it, Aldofashow? Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted March 20, 2013 Report Share Posted March 20, 2013 ok waid i sent it to you via email, still couldnt get it to send over forums... oh well! Quote Link to comment Share on other sites More sharing options...
Aldofashow Posted March 20, 2013 Report Share Posted March 20, 2013 Ahh man, I want to get into the 8.50s this summer. I know a higher stall will help me attain that goal. I feel like if I went with a 3200 I would be leaving too much on the table. LOL what does your truck run and what all is done to it, Aldofashow?i have never been to the track so I'm not sure but my passengers go ohhhhhhh shhiiiitttttttt LOL Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted March 20, 2013 Report Share Posted March 20, 2013 3400 stall and a TSP-228R here, love it! I had a 3000 stall prior, it was definitely not enough stall. Choose wisely!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.