jovanny Posted July 29, 2013 Report Share Posted July 29, 2013 Could someone tell me where it's located, Im pretty sure it doesn't work any more, Since Its at 80 with out the engine turned on. Quote Link to comment Share on other sites More sharing options...
1BAD2K Posted July 29, 2013 Report Share Posted July 29, 2013 Might be the stepper motor in the cluster, which is probably more likely imo. Quote Link to comment Share on other sites More sharing options...
BLNAWAY Posted July 29, 2013 Report Share Posted July 29, 2013 Might be the stepper motor in the cluster, which is probably more likely imo.x2 if its reading like that when off. But here's where it's located Quote Link to comment Share on other sites More sharing options...
Muggs Posted July 29, 2013 Report Share Posted July 29, 2013 Might be the stepper motor in the cluster, which is probably more likely imo.X3 Quote Link to comment Share on other sites More sharing options...
silverado777 Posted July 29, 2013 Report Share Posted July 29, 2013 If the needle always resets back down to "0" when the truck is turned off and key is out but goes straight to "80" with the key in the "on" position and not started, then it is the oil pressure sending unit. Quote Link to comment Share on other sites More sharing options...
T-Bag Posted July 29, 2013 Report Share Posted July 29, 2013 If the needle always resets back down to "0" when the truck is turned off and key is out but goes straight to "80" with the key in the "on" position and not started, then it is the oil pressure sending unit. This^ let me look for my thread on this where Steve helps out. Check back in a few after I search for it. Quote Link to comment Share on other sites More sharing options...
T-Bag Posted July 29, 2013 Report Share Posted July 29, 2013 (edited) Here you go, that was fast lol. Here are some real life pics of actual location and correct part #s of different brands etc. I believe you can easily change it if you don't have a blower on top. I still haven't changed mine haha. Don't want to remove blower. http://www.silveradoss.com/forums/topic/76639-need-help-oil-pressure-sender/?hl=%2Boil+%2Bpressure+%2Bsensor&do=findComment&comment=846394 Edited July 29, 2013 by Bad Ass Silvy (see edit history) Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted July 29, 2013 Report Share Posted July 29, 2013 Borg Warner S4202 if it winds up that you need to change the pressure switch..... Quote Link to comment Share on other sites More sharing options...
jovanny Posted July 29, 2013 Author Report Share Posted July 29, 2013 Thanks Just bought the part at autozone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.