tburkdoll Posted September 10, 2014 Report Share Posted September 10, 2014 I've got a vibration under load at highway speeds, thinking my drive shaft could possibly be out of balance. I noticed it has a shinny spot on the drive shaft and my crossmember has an area in which is also shiny above the driveshaft. Just wanted to get some input from anyone else lowered 3/4 and a c notch. (i also do not have the shims under the springs installed for better driveshaft angle) Quote Link to comment Share on other sites More sharing options...
Guero005 Posted September 25, 2014 Report Share Posted September 25, 2014 Is the shiny spot around the whole drive shaft? I have a flip kit and c notch on mine and before I drove it I noticed there wasn't much room for clearance between the shaft and upper cross member. So I cut it out. Quote Link to comment Share on other sites More sharing options...
atent.2009 Posted June 3, 2015 Report Share Posted June 3, 2015 Guero What cross member did you cut out cz mine is rubbing underneath the extented cab thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.