RottenSS Posted October 12, 2014 Report Share Posted October 12, 2014 So my gauge cluster stopped working. Anyone have issues with this before. Haven't been able to check fuses but hoping its that. Looking for any advice on what to look at and check. Quote Link to comment Share on other sites More sharing options...
Blick05SS Posted October 12, 2014 Report Share Posted October 12, 2014 I would message silverado777(steve) he repairs them and does and incredible job as well. Like you said if its something simple check the fuses out these clusters are knowin for issues though Quote Link to comment Share on other sites More sharing options...
Blown 346 Posted October 13, 2014 Report Share Posted October 13, 2014 If all fuses are good, the chance of all stepper motors going out at the same time is like being attacked by a shark in Iowa. My guess would be a burnt up circuit board. Quote Link to comment Share on other sites More sharing options...
RottenSS Posted October 13, 2014 Author Report Share Posted October 13, 2014 The fuses were all good but after I pulled them out and put them back in it magically started working lol. Quote Link to comment Share on other sites More sharing options...
SS6.oh Posted October 13, 2014 Report Share Posted October 13, 2014 Strange , these gauges never go bad lol Quote Link to comment Share on other sites More sharing options...
SSmoothSilSS Posted October 13, 2014 Report Share Posted October 13, 2014 MIne done the same a couple of times, don't know the cause. Quote Link to comment Share on other sites More sharing options...
Downeast Johnny Posted October 13, 2014 Report Share Posted October 13, 2014 The fuses were all good but after I pulled them out and put them back in it magically started working lol. Sounds like you may have had some dirty contacts in the fuse block. Quote Link to comment Share on other sites More sharing options...
silverado777 Posted October 13, 2014 Report Share Posted October 13, 2014 It is still an issue with the gauge cluster. Even though they started working again it will only be a matter of time before they shut off. Some people will bang on them to get them to work again but eventually they wont come back on. Just be carefully not to break the clear plastic cover. Let me know if you would like me to fix them for you. Thanks, Steve http://www.gmgaugeguy.com/ Quote Link to comment Share on other sites More sharing options...
RottenSS Posted October 13, 2014 Author Report Share Posted October 13, 2014 Thanks Steve. If it dies I will contact you. - John Quote Link to comment Share on other sites More sharing options...
beyondthe50 Posted February 28, 2015 Report Share Posted February 28, 2015 Mine do that from time to time. Sometimes all of them and other times random gauges. Quote Link to comment Share on other sites More sharing options...
silverado777 Posted March 2, 2015 Report Share Posted March 2, 2015 Mine do that from time to time. Sometimes all of them and other times random gauges. I can fix them up for you if you would like. http://www.gmgaugeguy.com/ Quote Link to comment Share on other sites More sharing options...
Chip Posted March 2, 2015 Report Share Posted March 2, 2015 Just send them to Steve his is the man!!!!!! Quote Link to comment Share on other sites More sharing options...
Stretchss Posted March 7, 2015 Report Share Posted March 7, 2015 there is a recall on the stepper motors from 02-07.i would replace them all while your in there. ss with tranny temp takes 7. there are videos online on how to replace. if you can solder looks like an easy fix. here is a video. http://youtu.be/oTm2oDx-_GM. this guy looks like he knows what he is doing. he gives you part number on video. dont buy the black ones. heard they are garbage. should be white and x25 or 27. there are places that can do it for you have to call around. i am adding blue led and blue bezel while im in there. will update later. just ordered parts today and usps takes for ever so will be next week. Quote Link to comment Share on other sites More sharing options...
jddmj Posted March 12, 2015 Report Share Posted March 12, 2015 Holy Old Thread Batman! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.