1BAD2K Posted January 13, 2016 Report Share Posted January 13, 2016 Mine is the black can with brass fittings located center of the attached picture real easy to do... Is yours routed from driver side valve cover into catch can, then out of the catch can into the pcv port on the back of the j tube? I have a mp112 also and need to install my RX can. Quote Link to comment Share on other sites More sharing options...
poopnewton Posted January 16, 2016 Report Share Posted January 16, 2016 (edited) i got a mighty mouse catch can. It works good on a 14psi turbo setup. http://www.mightymousesolutions.com/ Edited January 16, 2016 by poopnewton (see edit history) Quote Link to comment Share on other sites More sharing options...
LEVISER Posted January 16, 2016 Author Report Share Posted January 16, 2016 (edited) Check out post#10, 11 and 12 for pics. I used an apex catch can, http://www.apex-speed.com, there is also elite 2 catch can. http://eliteengineeringusa.com/installinstructions.html Look at the driver side valve cover towards fire wall and u will see the line that holds pcv to the top of air intake. Once removed you see how to best route new lines, to keep items from rubbing and used zip ties when necessary. Just take your time and test fit by putting side engine cover on to be sure you like the fit. Edited January 16, 2016 by Leviser (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.