kaze_v8 Posted September 10, 2015 Report Share Posted September 10, 2015 After countless searching, still no luck. Recently my truck started making this horrible popping noise under hard acceleration. Ive had a similar issue on my 300zx when my carrier bearing went out on the driveshaft. To my understanding these trucks have one piece driveshafts. My guess would be the issue is coming from the front driveshaft or the transfer case. If I drive normal I don't have any issues, nor any leaks, its only when I step on it that I start getting the hard popping from my front/mid section. Any help would be great. Quote Link to comment Share on other sites More sharing options...
1BAD2K Posted September 10, 2015 Report Share Posted September 10, 2015 Possible chain skipping a tooth in the t case. Not to uncommon. New chains are about $100. Quote Link to comment Share on other sites More sharing options...
Doughty08 Posted September 10, 2015 Report Share Posted September 10, 2015 Def chain, don't forget to do the case saver while ur in there. Quote Link to comment Share on other sites More sharing options...
kaze_v8 Posted September 10, 2015 Author Report Share Posted September 10, 2015 Possible chain skipping a tooth in the t case. Not to uncommon. New chains are about $100. Where can I source this chain from? Any help on a write up, im guessing it should be to hard for me to do. Def chain, don't forget to do the case saver while ur in there. Elaborate please. Quote Link to comment Share on other sites More sharing options...
1BAD2K Posted September 10, 2015 Report Share Posted September 10, 2015 Nah. Half a day job if you haven't done it before and just Google for parts. Like mentioned, be sure to spend an extra 20$ to get the case saver to prevent any pump rub. Quote Link to comment Share on other sites More sharing options...
kaze_v8 Posted September 10, 2015 Author Report Share Posted September 10, 2015 Nah. Half a day job if you haven't done it before and just Google for parts. Like mentioned, be sure to spend an extra 20$ to get the case saver to prevent any pump rub. Got it! Thanks once again Chief. Quote Link to comment Share on other sites More sharing options...
1BAD2K Posted September 12, 2015 Report Share Posted September 12, 2015 No problemo man! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.