rudy91040 Posted January 20, 2021 Author Report Share Posted January 20, 2021 (edited) 1 hour ago, broke1 said: Btw,my rear brackets look EXACTLY like what Rudy posted. If someone can’t post pics up I’d be greatful. Rudy has the pics of the rears but won’t post them becuase it will prove they are indeed his 1st design brackets. These aren’t the brackets sold by SuperSub or JYD. I bought one of Rays(SuperSub) mp112 spacers about 2 years ago. Rudy had a truck he had converted to 6 speed or was in the middle of it to my recollection. I don’t think it was a SSS either.... JYD, that’s the guy that made the brackets before Ray. They were built around 14” rotors. I’ve seen pics of those brackets pop up when people were selling them, usually to upgrade to my brackets or Ray’s. Ray came along and made a single piece bracket built around a 15” rotor. After a short while Ray stopped making the brackets. I contacted him and asked if I could carry on the torch so to speak. He said he didn’t care. So I made them. The front bracket has changed every so slightly (mostly cosmetic or adjustments to make machining faster/less tool changes). I never made a front 14” rotor bracket, only 15” rotor brackets. The rear brackets have only ever been one design. It always had an offset machined into them. Your brackets are flat on both side. That’s a JYD design. Also, every single bracket I sell has “for off-road use only” machined into every single piece I sell. Yours don’t say anything. You’ve got quite the imagination there buddy. I never converted any truck to a 6 speed not that it even matters. You also sent me pics of your hardware. Your hardware is black oxide, 8.8 grade, socket head cap screws. I have always used yellow zinc coated, 10.9, hex cap bolts. You claim I stopped selling brackets but I never stopped. Go check my post history and stop making things up. So literally every pic you send is not of my parts yet you have convinced yourself it’s my stuff. I’m sorry this is so hard for you to grasp. But those are not my parts. Go back and look at the how-to. Those pics show my brackets and hardware. Your brackets and hardware look nothing like mine. Also, please stop threatening me. I understand you are upset. But none of this is my fault. Those are not my parts and it’s not my fault you waited over a decade to try and get it straightened out. I suggest you contact JYD since those are his parts. Here is a post I found when I googled JYD. That’s the brackets you have. That’s the hardware you have. Again, the brackets you have are not from me. Edited January 20, 2021 by rudy91040 (see edit history) Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 20, 2021 Report Share Posted January 20, 2021 (edited) And we ignore the part where YOU,Rudy,said you sold me a set? Come the **** on..... If your pics from 2010 came up we’d see they are one on the same. My brackets don’t look anything like the JYD brackets u posted. I didn’t wait a decade to complain either,I sent you emails right when this happened and you went MIA. I just happened to see you had sold sets again and thought I should warn the public. No one has threatened you either.... Edited January 20, 2021 by broke1 (see edit history) Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 20, 2021 Report Share Posted January 20, 2021 (edited) 4 hours ago, rudy91040 said: Good luck with your scamming Rudy. BUYER BEWARE!! Edited January 20, 2021 by broke1 (see edit history) Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 20, 2021 Author Report Share Posted January 20, 2021 (edited) 37 minutes ago, broke1 said: And we ignore the part where YOU,Rudy,said you sold me a set? Come the **** on..... If your pics from 2010 came up we’d see they are one on the same. My brackets don’t look anything like the JYD brackets u posted. I didn’t wait a decade to complain either,I sent you emails right when this happened and you went MIA. I just happened to see you had sold sets again and thought I should warn the public. No one has threatened you either.... I never denied selling you brackets. But the brackets you are showing pictures of are not mine. Those are JYD brackets. Anyone with half a brain can see that those brackets for the front look nothing like mine. As I’ve stated before your rear bracket is totally flat and no machine to offset. My brackets have always had a machine offset so the end-user didn’t have to shim them. Your hardware is the exact same hardware that’s in the picture of the JYD brackets being sold by another user. If you want to see what my brackets look like from the very beginning go look at the how to. You will see very plainly that your brackets are not made by me. Go look at the date of when that how to was written. Again I’m sorry you got taken advantage of but that is not my fault and those are not my brackets. Look at this thread. It’s from July 2010. Look at the pics. Read the thread. You will see those aren’t my brackets and you can read about the user that had his guide pins rub in the rear because the JYD brackets are flat and he didn’t shim the bracket to center the caliper over the rotor. Edited January 20, 2021 by rudy91040 (see edit history) Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 20, 2021 Report Share Posted January 20, 2021 Whatever Rudy...... You’re in to deep and will never admit it. I understand we all **** up(esp 10 years ago when we were all younger and dumber)but you’re somthing else buddy. Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 20, 2021 Author Report Share Posted January 20, 2021 22 minutes ago, broke1 said: Whatever Rudy...... You’re in to deep and will never admit it. I understand we all **** up(esp 10 years ago when we were all younger and dumber)but you’re somthing else buddy. I’m not going to admit to something that I didn’t do. I have given you photographic evidence that those are not my brackets and you still deny it. I don’t know what else I could possibly do to prove to you are wrong. You have literally made up things that never happened. I have backed up every single thing I’ve said with photographic proof. You keep making endless claims and statements with no proof. I guess it this point we will have to agree to disagree. Again I’m sorry you got ripped off by JYD but that’s not my fault or my problem. My brackets never looked like those front brackets and while the rear brackets are similar, there is a major difference in the thickness of the brackets because mine have a machined offset and JYD simply makes his flat. I’m sorry you can’t see this or understand this but facts are facts. Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 20, 2021 Report Share Posted January 20, 2021 The fact is I only ever bought one set of brackets and those were yours. Sorry,I must not be speaking English slow enough for your simple mind to understand. Make stuff up as I go along? Like u saying I threatened you?lmao BUYER BEWARE!! Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 21, 2021 Author Report Share Posted January 21, 2021 57 minutes ago, broke1 said: The fact is I only ever bought one set of brackets and those were yours. Sorry,I must not be speaking English slow enough for your simple mind to understand. Make stuff up as I go along? Like u saying I threatened you?lmao BUYER BEWARE!! You can keep insulting me and keep saying that those are my brackets but that doesn’t make it true. The pictures you sent me are pictures of JYD brackets and hardware. So you either don’t remember buying them, you are trying to get free parts from me by threatening me or you are just trying to give me a bad reputation. Either way, it’s not my fault and not my problem. Perhaps if you had tried contacting JYD a decade ago when you purchased his brackets he would have helped you. But again, that’s not my fault or my problem. Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 21, 2021 Report Share Posted January 21, 2021 Whatever Rudy..... Youve already LIED and said I threatened you. I don’t threaten weasels. You clearly aren’t going to make it right and say anything to try to make yourself look innocent. When I see you selling these online again,I’ll be sure to chime in and let folks know what to expect. Anyone reading these posts can clearly see no one has threatened you either so they know you’re a LIAR. BUYER BEWARE! Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 21, 2021 Author Report Share Posted January 21, 2021 (edited) 2 hours ago, broke1 said: Whatever Rudy..... Youve already LIED and said I threatened you. I don’t threaten weasels. You clearly aren’t going to make it right and say anything to try to make yourself look innocent. When I see you selling these online again,I’ll be sure to chime in and let folks know what to expect. Anyone reading these posts can clearly see no one has threatened you either so they know you’re a LIAR. BUYER BEWARE! You literally threatened to sabotage sales while claiming not to have threatened me. Let’s talk about facts. You claim to remember all kinds of facts and details that never happened. Yet you waited over 10 years to try and make it right? Every pic you have posted is of a competitors product, yet you expect me to claim it as my own. You claim to have a box that the brackets came in (which are not mine) and the shipping info is me. Maybe that’s because they are not my parts and I didn’t send them to you. By the way, I’m still waiting for a pic of the shipping label and box. Yes I sold you a set of brackets in 2010, but the brackets in your pics are not my brackets. You must have gotten those from someone else. I have never had a design that looks like the fronts and the rear brackets have always had an offset machined into them and that design has never changed. Your rear brackets are flat and require shimming. That’s a JYD design. To my knowledge, nobody else even mass produced a rear bracket. You claimed to have emailed someone after receiving the brackets in your pic and told me you were missing parts. Guess what, I have every email for every transaction for every set of brackets I’ve ever sold. I have a folder for every customer containing every single bit communication. It’s called covering your ass. Guess what, no emails from you or to you other than the release I sent you and you sent it back. So the email you sent complaining was to someone else. I’m sorry this is so difficult for you to understand but I will try again to make this as simple as possible. I’m sorry you got ripped off, but those aren’t my parts. They look nothing like my brackets and the look exactly like JYD brackets. Perhaps you should contact JYD about your missing parts. When you get a chance, please post a pic or email me a pic of the shipping label and the money order receipt you claim to have. I think it might shed some light on things. Also, thanks for bumping this thread. I’ve had more than a few people email me commending me on defending myself and sold a couple of sets of brackets too. I eagerly await your response with those pics. Edited January 21, 2021 by rudy91040 (see edit history) Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 21, 2021 Report Share Posted January 21, 2021 Let’s see this release I signed and I’ll be happy to continue this conversation. You’re a lying piece of shit Rudy. Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 21, 2021 Author Report Share Posted January 21, 2021 1 hour ago, broke1 said: Let’s see this release I signed and I’ll be happy to continue this conversation. You’re a lying piece of shit Rudy. Do you give me permission to post your info? Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 22, 2021 Author Report Share Posted January 22, 2021 Still waiting on the pic of the shipping label and money order...... Quote Link to comment Share on other sites More sharing options...
broke1 Posted January 22, 2021 Report Share Posted January 22, 2021 Post away Rudy. You don’t have any liability waiver from me. Quote Link to comment Share on other sites More sharing options...
rudy91040 Posted January 22, 2021 Author Report Share Posted January 22, 2021 Still waiting on the shipping label pic and money order you claim to have Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.