The_swede Posted May 17, 2020 Report Share Posted May 17, 2020 Hi guys & girls ! I live in Sweden and knowledge and spare parts are not as easy as taking a trip to Autozone. I bought my -03 awd couple of weeks ago with a p0446 code and ordered a tank pressure sensor. Truck had the canister and solenoid changed and modded to the newer style with remote filter so I at least think this should be ok. After changing out the pressure sensor it throws p0 453 and still the 0446. I have double checked connections, harnesses and piping. Left to change seems to be the purge valve but codes doesn’t point in that direction. Truck runs fine and no problem what so ever to fill the tank, any suggestions would be greatly appreciated. i do understand, and knows, how to use a multimeter but connections on to of the tank is not that appealing.... brg Per Quote Link to comment Share on other sites More sharing options...
kestell123 Posted June 2, 2020 Report Share Posted June 2, 2020 Check the purge under the hood for charcoal pellets that can be sucked up from a failed charcoal canister. Sometimes the inlet side will be full to the top with pellets, other times it is just a pellet or two holding the valve open. It is only one bolt to remove it and once it is out you can rig up some leads to apply 12 volts to it . if you hear the solenoid click you should then be able to blow and suck on either end to clear the pellets .A new one is not expensive but it would be best to remove the line from the canister and blow out the remaining pellets from front to back thru the line you removed from the evap. solenoid under the hood. 1 Quote Link to comment Share on other sites More sharing options...
Extreme1 Posted June 20, 2020 Report Share Posted June 20, 2020 check you main line going to the front of the truck where it bends in front of the gas tank along the frame it tends to rust in the line holders Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.