McGaughy's KIT

[evandostert]

I am wondering who has gotten rid of there vibration in the rear.

[r8rs4lf]

I talked to Mike @ MG and he told me the reason for the vibration is because the leave spring needs to be in the upper hole in the shackle and the lower hole in the hanger for a 3 1/2" drop and that makes the pinion angle right.

 

I don't have mine set up like that so I still have the vibration, more like a shutter @ 70mph.

 

Late- Alex

[evandostert]

is there a way to have it a little less then 3 and 1/3

[evandostert]

is there a way to have it a little less then 3 and 1/3" drop in the rear. 

<{POST_SNAPBACK}>

[evandostert]

Is there a way to have it a little less then 3 and 1/3" drop in the rear. 

[r8rs4lf]

As per Mike @ MG, I have my springs in the lowest holes to the ground on both the shackles and hangers and it gives me a 3" drop in the rear. I don't see how you can get less with that kit.

 

Late- Alex

[cokedrvrbjw]

I had the FULL drop and i still had the vibration at 70. I took off the rear bumpstop mounting plate and bolted them right to the frame...then i cut the fronts down about 1/3 and the vibration is gone.