hawaiianstyle

Thanks MID12sSSS for the good information. U fortunately I don't have a lift, so I'm going to have to figure it out. The hangers you're talking about are the rear hangers correct??

Just got my 07-13 GM Silverado/Sierra (All Cabs) 0" to -4" F/5" or 6" R W/ SP Shocks, part # 647SP in and I can't wait to get it installed. Have a question though, I've been reading the instructions and it says you have to drop the gas tank. Is it possible to install the flip kit without dropping the gas tank????? And can I put my stock tow hitch back on when flip kit is installed???? I was thinking that I could install the flip kit like DJM installs their flip kit. Is this possible????

Do you have pictures of your new MOOGS?????

You are doing this to the stock shockes?

I would like to see the whole DJM kit in black, to match the sway bar!!!!

cmoney, can you add a picture of what you're talking about. I'm about to purchase a DJM 3/4 Kit>

Just wondering if anyone has tried this bulbs out and how do they compare to DDM HIDS?

Norcal SS, I know you deal with DJM and everyone swears by it being the best. But I've been reading on other forums and they've been saying that mcgaughys are better and they've ran in to so much trouble with the DJM kits. If there were issues with the DJM kits before, were they all corrected. Here are two links to the forums I've been reading: http://performancetrucks.net/forums/showthread.php?t=479987 http://performancetrucks.net/forums/showthread.php?t=480216 But I really have my site on the DJM kits. Help me believe they are the best..

With the measurments that I took and posted in the earlier reply. What would be my final measurements after a 3/5 drop? Just subtract 3 from the front and 5 from the back? Dumb question I know. No notching correct? And does DJM offer the sway bar with the 3/5 drop kit?

I have a 2010 Denali CC, hope this info helps. I really don't want to notch my frame.

I just measured from the ground to the bottom of the fender, front 36.5 and the back 39.5 and I have the same tire size, 275 55 20's. Can a 3/5 DJM kit fit also? Or would I have to go with the 3/4 DJM kit? I too, don't want to cut my frame, bouncy rear end, or to stiff.

Mahalo. I'll be ordering a set soon. How about leveling kits for the front. I've read some of your other posts about K bee Coil over adjustable shocks. Or are the Blistens good too?

Sorry, but the new DJM sway bars. Do they make a set for my truck? I guess that was my question.

How would this work on leveling out my truck: The 5100 Series (Ride Height Adjustable) shocks feature multiple snap-ring grooves on the body of the shock to accommodate different spring seat positions, allowing height adjustments from 0" to 2.5", depending on the application. By raising the spring seat position, the factory rake can be altered to achieve a level front to rear ride height while accommodating up to 33" diameter tires.

Will this kit fit on a stock height 2010 GMC Sierra Denali Crew Cab?