Jump to content

ivin74

Member
  • Posts

    108
  • Joined

  • Last visited

Posts posted by ivin74

  1. ok fellas im doing something different so the blower has got to go My kit is polished below is included

     

    -both fuel setups return and returnless

    -two pulleys 3.2 w/ belt, 2.85 w/ belt

    - all hardware for install

    - i have 2 intake tubes one tapped for meth/nitrous and one unmolested

     

     

     

    you will need a fuel pump you can order it from magnuson for cheap

    im asking 3000$ + shiping

    IMG_3435.jpg

    is you Radix water cooled?

  2. Theres a few things you could do, the easiest would be to get your truck tuned and have the shop increase firmness in the tranns, or another route you could take would be to get a Trans-Go HD shift kit. You can order it from Jegs not that expesive and it will make your truck shift nice and firm. Also get a set of billit servo's like the serperior ones a few trucks on here are running or a set of corvette servos. I have a Custom tune from Nelson Performance with a Trans-Go shift kit and corvette servos, and it will break the tires loose first and second when i get on it. The only thing to remember is that you dont want your truck to shift to hard, hard isnt good for tha tranns you want it to shift firm. The way I have mine set up is the most i would go its enough for me at least, and whoever rides in my truck lol :D

     

     

     

    Thanks

    It sounds like you have a good tranny set up.

  3. VIEW MY ALBUM FOR PHOTOS TAKEN LAST MONTH.

     

    2003 Chevrolet Silverado SS Edition with 58,xxx original miles. Red exterior with dark gray leather interior. But this is by no means an ordinary SS. If you are looking for what I would consider the best Pickup truck to own, this is it. This is one of the only true AWD (All-Wheel-Drive) GM vehicles available. And for those of you whom do not know the difference, there is a major difference between AWD and 4X4. There is an enormous amount of money spent on this truck to not only separate it from the rest, but a ton of money spent to do all the upgrades correctly. The upgrades cost approximately 16k.

     

    To start with, the truck is SUPERCHARGED! It has a Whipple TWIN-SCREW Supercharger that is perfect for this truck. Estimated power at about 550HP (I never put it on the Dyno nor have I ever brought this truck to a Drag Strip), this truck drives better than it did from the factory, while getting better gas mileage than from the factory (Highway at 65 averages 19 MPG). The supercharger is maintenance free. The truck has a transmission shift kit. Upgraded driveshaft. Fully equal length ceramic coated headers. Full exhaust system. This truck sounds incredible. This truck NEEDS ABSOLUTELY NOTHING. This is a turn key truck.

     

     

    THERE IS NOT A SINGLE LEAK OF ANY KIND OF ANY FLUID ON THE ENTIRE VEHICLE. IT'S THAT SIMPLE.

     

     

    In addition to the other upgrades, this truck also has a very useful bed cover. This is the Roll-N-Lock roll up bed cover. It is a complete bed cover system that looks factory. This was a $1500.00 install. The bed also has a professional spray in bed liner. Has other goodies like upgraded rear taillights.

     

     

    I will be removing the Pioneer In-Dash Navigation unit and replacing it with the original BOSE 6-CD Changer head unit.

     

     

    This truck is in excellent condition. The exterior is in excellent condition as is the interior. No rips, tears, or significant blemishes. Some little scratches here and there but this truck is in nearly showroom condition.

     

     

    NO ACCIDENTS. NO SURPRISES. NO STORIES. SAD TO SEE HER GO.

     

    CALL ME AT 516-205-5020 IF INTERESTED. IAN

     

    $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

  4. Just this wkend my SSS alternator stop working so I replaced it my self (saved a couple bucks) yesterday with a brand new one. My computer is telling me that is still not charging and is not i look at the volt meter. Does anyone here ever had that problem? What do i need to do any suggestions?

  5. Ordered my wheels this morning. They should be here Friday.

     

    I got the 22" SS Replicas, gonna be sittin on 305/40/22's.

     

    I was runnin some 24 ASA's on 305/35/24's, but it was just too low profile for me.

     

    The SS wheels are one of the best looking factory wheels of all time, can't wait for the 22 reps!

     

    I will post pics hopefully Saturday if i get to wash it.

    post some pics as soon as you get them one dude
  6. This is what he sent me, i dont know what to tell him

     

    So lately my wife has been working alot of evening shifts, and for the past couple months has been carpooling with a male co-worker. At first I didn't mind, I would rather have someone with her in case she has car trouble or something like that, but it seems that they have become a little bit more than friends. You know the scenario, the phone calls that hangup, she starts wearing nice clothes to work, talking about him all the time, etc. I don't know what to think. If I'm out in the garage when she gets home (usually after midnight) he just drops her off and leaves, but if the lights are off in the garage and I'm in the house (they think I'm sleeping) they sit out in the car for like twenty minutes. I asked her once what they were doing, she said "just talking"....whatever. So last night I decide that I'm going to see what really goes on out there. I leave the garage door open, but turn out all the lights. About the time she usually gets home, I go out and hide in the garage and wait. In a few minutes, his car pulls into my driveway, and I'm hiding behind my Raptor. When his headlights shine through the garage and onto my bike, I see something that I just can't believe. The rear sprocket is already worn and hooked but the chain looks OK. Do you think I should change just the sprocket or the chain and sprocket?

     

    ur so full of it?

  7. i have 20 inch rims and cannot find a drag radial to save my life ANY HELP? i will be at 500-550 horses then in two months nos on top of that so if I absolutely have to i will drop the rim size let me know what yall think

     

    i recommend 305-45-R20 they look great and they grab good

×
×
  • Create New...