[Mobil-1 M1-206 Tall Oil Filter]

i use the m1-113 is there a bigger one for this one

[Shift Kits]

ok guys im having some trouble i bought a zippy shift kit i showed it to some pepole and transmission guys and every one said i should of got the transgo or superior that theses are the best i would like some feed back from yall guys about your shift kit and servos thanks

[What Els Should I Do]

i was wondering if i can have some help with trany mods for 4L65E right now i have a zippy shift kit and a trany cooler not installed yet what els can i do besides a stall,shift kit and trany cooler im dont really know that much about tranys so thats why im asking for some help by the way what would be the best stall brand to go with was thinking about the yank thruster 278mm,2.21str 3000 rpm stall thanks for any info

[Tru Cool Bypass]

I'm in Stephenville - no, leave it off. If you are worried about over-cooling you can block some of the cooler with a bit of cardboard or aluminum plate but I assure you it won't be needed. Run Dex-VI (synthetic) if possible and don't beat on it until the Dex-VI gets to at least 130-degrees, 150-160 is best IMO.

 

Mr. P.

 

 

thanks alot very good info

[Tru Cool Bypass]

need some help where i live the the lowest temp we got here is about 20* do i need to get the bypass with the cooler or no thanks

[Am I Safe?]

I have the ZIppy kit and a Yank 2600.. I didnt run a tranny cooler until I got my maggie on. My temps even when beating on it at the track never exceeded 170-175 thats perfectly safe. Its really up to you.

 

 

what is a maggie yall lost me there

[Kooks Or Belanger Headers]

i was thinking about getting myself the kooks and get them ceramic coated he said he dont care about the price but i heard that the belangers are the best for the 6.0 has the most power gains i dont know about the kooks power gain i just herd that they are bad ass headers

[Kooks Or Belanger Headers]

my buddy was asking me what kind of headers he sould get kooks or belanger if yall could give me some advice to relate to him it would be good thanks

[Which Trans Cooler Is The Best If Price Is No Object?]

Thanks. Sounds like the true cool is the most efficient so now to find the best price.

 

BTW, does it have a fan or not?

 

 

i dont think it comes with a fan not the ones ive seen

[Another Cai ?]

i think an intake is an intake all of them do the same thing get a custom tune

[Knock sensor reading]

In Texas, I don't know. I can tell you that I was running 110 octane fuel and was seeing knock retard as well. I determined it to be false knock due to my exhaust so I just turned down the sensitivity of my sensors until the retard went away.

 

 

thats somthing i forgot to say he also turn down the sensitivity and still does it im thing its my exuast because we were out testing my truck then all of a sudden it went off and its been doing that for about 8 weeks now maby more cant remember and been doing alot of racing within that time

[Knock sensor reading]

Empty the gas tank and for an experiment put 1/4-tank of very high octane racing fuel (like 110+) and if the knock goes away then yes it's the tune, if not then it's most likely faulty sensor or false knock.

 

Mr. P.

 

 

where can i get high octane fuel

[Knock sensor reading]

i have got new exuast and check my knock retared an it went to an 8 but only at top end some time at low end im wondering if it could when i gun it and the exuast shakes aginst somthing could this be why

[Tru-dual Mufflers]

i do know when you take off the cats the light will come on the guy who does my tuning disabled my o2s

[Husband Must Have Came Home Early..lol]

i wouldnt want to be him that sucks

[Have A Problem]

i have arizona speed and marine long tubes so anybody with theses headers make sure you look at that.....that trany line looks fine to me but my header is rusted alredy it made a grove in it what sould i do about that..

[B&m Trany Cooler]

two top views

 

 

from underneith were i spliced into the stock hardline.

 

 

thanks alot man by the way looks nice

[B&m Trany Cooler]

http://store.summitracing.com/egnsearch.as...+115+4294854215

 

that should be it...

 

 

thanks alot man does any body what kind of fittings i need to buy

[B&m Trany Cooler]

click on the tbyrne link on the side of the page. not sure if they have fans on the their b&m though.

 

 

ya i seen it but it dont have the fan but thanks

[Have A Problem]

i would bend it away for clearence like MR P said. if you are talking about rubber hose, then i WOULD NOT USE it. headers/heat and rubber hose = FIRE..

 

ya dont want that i bent it ill see if it stays like that thanks for yalls info

[B&m Trany Cooler]

looking for a b&m trany cooler with fan were can i buy one an need part #

[Have A Problem]

IMO as long as you've got 3/8" clearance you're ok.

 

Mr. P.

 

 

its cutting it close but can cut and re route the line with a hose

[Have A Problem]

i notice that my trany lines are rubing on my headers on the passenger side i bent the lines a little and it clears but barly has any body had this happen and if so what did yall do or what can i do to get more clearence from the headers

[What do you love about your VHO/Vortec Max the most?, what made you bu]

i always wanted a 6.0 ever since mu buddy got a VHO looked for about 2 yrs and found it at the dealership a 2007 classic gmc performance edition vortec max SLE2 with sunroof , color stelth grey metalic 20 inch rims 3.73 gears... mine is the only one like it were i live so thats why i like my vortec max caus it the omly one like it here. performance wise i have long tube headers,intake,no cats,hp tuners,DNA race exuast, i have a zippy shift kit,yank stall 3000,and 4.10 gears i still have to put in cant wait....

[What Brand Of Shift Kit]

THANKS for all the info