8 UR HMI

wheet

i paid 17 plus ttl back in 07 for my 03 with 82,xxx miles.

oh ur funny dan!!! that lsa is what most ppl ive seen use for F/I or a BLOWER CAM!!! i do have a tiny bit of knowledge in my brain somewhere

zach i pulled dans tank on his truck in 10 minutes. i know how to do it and im good at it. and the project hes talking about is figuring out my converter problem and dash noise

yea i didnt read all the way ray. lol. i didnt see he was gonna add a blower

just out of curiosity, y are u going with a 114 lsa?

that would be the death penalty in texas!!!!!! fvck that bitch seriously. she doesnt deserve to go to a mental hospital she should be stuck in a cell with no sunlight and sound proof so nobody could hear her dumbass singing.

matt seriously plug wires? i had to get new ones because my factory ones didnt fit with my LT's . msd or talyor wires are a must with bendable boots for lts

nitrous is the MOST CONSISTENT form of forced induction. a 75 shot u wouldnt even feel when it sprayed. i had a 100 shot on my truck with my cam and tranny beffed plus all the other bolt ons. u can run nitrous in cold or hot weather and it will run DEAD on to what its suppose to do. when u get a blower u have to worry about atmospheric pressure and temperature that will change in the tune. honestly if u have a grand id beef the crap out of ur tranny and get a good TCS stall. nitrous will be fun, but ive seen people blow through fully built trannys like mine (same builder did a lot of ours) with a 150 shot, lts, cam, etc... and u cant build a 65e better than a jerry tranny like the one i have unless u have billet input/output shafts. the factory timing tables and fuel tables are so variable that u could spray a 75 shot without touching the tune and still have no problems.

unless u are pushing some serious numbers, u dont need anything bigger than a single 3" im running a custom y pipe all the way back from my headers. it flows great.

shit i dont even have bump stops lol

ok. well round rock is about 10 miles north of austin.

ok well this is my buddies but i want one of his guitars and he said hed sell it to me for 100 if i sold this for him. (guitar is worth about 300 but he has like 15 of them). its a 3" in 3" out and its BRAND NEW!!!! we were gonna put it on his denali but they shipped a 3" instead of 3.5. so it has sat for like 6 months in the original box. paid 85 plus shipping for it so id like to get $50 plus shipping OBO. here are the pics. model 12219 3" universal.

what part of mississippi

its a friendly helping situation. no point to be a vendor for a feeler thread, bob from BSER isnt a vendor and does group buys so y cant christian help a few ppl out?

no its not a truck thing but it is def video related lol http://www.youtube.com/watch?v=CZzwaUJZNeI

if they could do them in black i might b interested. would have to sell my rims first though,

looks awesome. i would love to do any of the roll/spray on liners but theres just so much weight with them when they harden

CHRISTIANS NUMBER EVERYONE!!!! CALL AFTER 6PM CENTRAL TIME. u can talk to him about what u want and everything. 512-786-2011 tell him u are from silveradoss.com and bob gave me ur number.

its DIRECTLY on the lcd screen. its almost like photo paper

christian has is tax ID license thing and gets them discounted. he has about 1000 LED'S at his house and a few hundred resistors. blue white and red. FOR EVERYONE DOING THIS ON THEIR OWN, u have to sand the top of the led's so u dont get hot spots. lightly sand them til its a milky white.

TO THATALLCANADIAN, if u look in the second picture, u can see the display has a blue cover over it, ( it goes directly on the display under the bezel and plastic and we cut out the factory piece on the layover. i dont have any pics of that but its pretty simple.

yea well like 5 of the bulbs were out so while i was replacing them i thought we could do the leds. i dont want red even though my radar detector is red. my alarm led is blue so i said BLUE it is

the PRND321 are yellow factory leds buil into the display as well as the odom etc.. we lay a plastic sleeve over them and it can turn them blue or red. if u wanted white it would have to be changed to blue for that part but we can do the white everywhere else.

correction, if u want all switches, door locks, lights on the left, cluster, and a/c done, its 125 plus shipping which is like 10 bucks. i can GUARANTEE the work that christian does. he and jon have done MANY of these and both have identical procedures and stuff. last week alone he did 3 others besides mine and can do, BLUE, WHITE OR RED leds and if u really want, ORANGE for 10 bucks more.