BenKey

Does this help?

That would be on the pressurized side. You can place your wb O2 after your turbo. You would just need to have an O2 bung cut in the pipe and leave your stock O2s where they were, if that has been the hole you were using. Plus, I don't think it's a good idea to remove the stock O2 from in front of the cats, if that is what you have been doing. The front O2s are pretty important to leave in place. The stock cats don't really have anything to do with that.

I didn't think you could put the wb O2 sensor in the charge line for a turbo? Unless you have it after the turbo? Maybe the LC-1 is different.

I could go for some pics or vids His truck was pretty badass. How did you get the 90mm FAST TB and Intake to work? That was the last thing he was working on.

Was there a ? somewhere. These trucks have been posted on here before. Nothing really special. It would be called a LT in the states Maybe. I'm not even sure it's LT caliber.

I would like to see more people doing them themselves. Wasn't there a how-to to go along with instructions? The amount of money some are getting charged kills me.

The SVO injectors are larger also and require a pigtail changeout. Many f-body guys run them when they upsize due to the quality. It is suggested that they are the best on the market.

Looks badass, Jeff. Got any pics with the intake cover off?

Yeah......

Jeff, are the rockers adjustable? I can't remember what type of lifters you said you were using? If you are using stock type, how much pre-load are they setting it to to start with?

Don't they use Ferrera valves? Or, are they making those themselves also?

What would cause valve stems to mushroom? A hammer?

Rocker arms, push rods?

Not too many good things being said about Patriot here lately. At least one sponsor has dropped their products from their line. I believe it was Texas Speed. Good luck with them. Adjustable rockers and CompR lifters?

C5R

my truck: '03 SS engine size: 6.7L (410ci) 11.3:1 CR Callies LS1 Racemaster crank 4" stroke 4340 forging Perma-Tough heat treated Angalite drilled rod journals Diamond pistons - 4.040" bore Forged rods (6.125") ARP mains GM MLS .52 compressed head gaskets camshaft: Futral Motorsports (FMS) custom cam, .236/.243 .603/.620 114 +4 cylinder heads: Total Engine Airflow (TEA), 72cc, StgIII heads Farrera valves 2.080 intake / 1.60 exhaust TEA Gold springs (rated for .650" lift) Titanium retainers Flow data: Lift int exh .1000 70.5 51.1 .2000 145.6 117.0 .3000 213.0 171.6 .4000 268.1 230.3 .5000 307.2 257.5 .5500 321.3 262.5 .6000 337.4 267.7 Comp chrome-moly hardened pushrods ARP Head studs Crane Gold Race adjustable Qwik-lift rockers CompR lifters Hardened pushrods pullies: stock intake system: stock intake manifold SVO 42lb injectors Volant cold air intake exhaust system: Pacesetter coated L/T headers 3" Power-cat Converters Custom 3" exhaust Flo~pro dual in/dual out muffler pcm modification: EFILive Flashscan other: PCM controlled Flex-a-lite electric fans Custom built 4L65E Yank TT2600 stall Transgo HD shift kit w/corvette servo B&M 29,200btu tranny cooler - radiator by-passed Ported LS6 oil pump Rollmaster double roller timing chain Dual Walbro GSS340 in-tank fuel pumps.

Just means we have the more rare color.

That has been posted on here before, including the number vs colors. Do a search for it.

They only made a little over 10,000 it's first year. From the numbers of '03s still being bought new, I'd say that they wouldn't exceed that number for '04. I still haven't seen any numbers though.

I have the Transgo HD-2, series B, shift kit and corvette servo. I bought it from JAG Performance in San Antonio. It has 2 spacers installed. I have the Yank TT2600 converter. Both are self- installed. Moderate towing 2-3K pounds (boat).

Install is fairly straight forward. As long as you don't freak when you see the valvebody and have to take it apart. It's really easy and can be done in your driveway. Just get yourself plenty of old t-shirts or towels to spread underneath. It constantly leaks while you're under there. Drop Zippy a PM on the Superior kit. The transgo is available through Tbyrne, but not sure if he has the HD kit, which is the one you want. It's also the same one that FLP puts in their trannys.

I have the Transgo-HD series B kit. Comes with a corvette servo. Zippy - master of all tranny work (no joke)- likes the Superior shift kit. Not sure what the diffs are. Maybe he'll pipe in here and discuss. I know of a couple of us with the Transgo kit, not sure if anyone has done the Superior kit, "yet".

You need to get a shift kit installed. That will take out any looseness, if that's a word, that you have. It will shift 10x better also.

What exactly is orange peel? Is that something that would only show in black - mostly?

Somebody needs to find the search button, if you really think there hasn't been any threads about problems. Numerous have had the same squeaky shock problem you have had.