4doorsssilverado

If your willing to separate the front from the back I'll take the front rotors and discs give me a price been wanting to do this for a while to my clone and do you have the brackets to install them

thanks everyone for the comments and yeah I don't really drive it since I'm always working and when I do i hardly get off and it had a roll pan a few years back but think it would look weird from the back with the way the claddings are just my .02 and on the exhaust I need to do something about that replacing a 180 dollar tip every other time I take it out isn't in the plans hits pretty bad also just ordered the clear headlights and fogs w/o the orange and led tail lights and might pull the trigger on the red leather interior just can't decide if to go all red or red/white center/white stiching or all red w/just white stiching

Here's a few more I found on my phone

Here's a few piks of my crew cab clone hadn't logged on here in a while added the cowl hood the oem bumpers and a corsa sport exhaust here's some piks of when I was taking it out to Baytown for the shootout plan on redoing the interior in red katzkin leather if I don't sell it

How much you want to pay for a tbss I might sell my wifes 07 tbss fully loaded marron leather sunroof ect. Its only tuned and k/n and catless if your interested pm me

Double

No mine doesn't have drop spindles it has drop springs and drop arms and relocated lower control arms so they could align it and so the tires could be straight and yeah if someone could help me out on the rear set up I would really appreciate it thanks

No leaf springs are in stock location and on the wheels in front I think they're 22x10 w/6.5 bs so I'm guessing it should have enough space in front

I have a few questions in reference to this kit you think it will work on my 06 silverado 1500 crew cab if I'm not mistaken they come with 12in. Rotors in front and on the rear it has drum brakes would this kit work or what would I need but my rearend is narrowed about 3 1/2in. Per side moreless for the intro wheels and Idk if it matters but my truck is on 22x10/24x10 intros any help would be appreciated ever since I put these wheels cant stand the way the brakes look to small behind the wheels heres a pik these are the only piks I could find working out of town thanks in advance

How much you want for them shipped pm me and if you could send me a pik of the broken (missing) piece thanks in advance

Thanks for the comments and i'll try to post piks as she makes progress

How much you want for the claddings shipped to 78541 edinburg,tx

Like title says i'm looking for the brake ducts for the front of my ss clone dont really need the mesh grills I have those but if included thats fine,or also if someone has a complete oem bumper here close to texas post up i'm working near houston,tx so let me know if anyone has anything thanks in advance

Theres some piks of mine on this site and on rgvtrucksperformance.net also it has all the ss claddings on it heres a pik of it i'm from the rgv and i know theres (2)crew cab ss down here right now that i know of a marron with black from phatboy racing crew and mine And heres some piks of jesses truck from phatboy racing

On the claddings i used the rear doors and extended them,as far as, my truck goes its at the tranny shop right now getting fixed something felt like it was giving out so its getting checked right now as far as the system goes i bought (2)15" kickers L7s now i just got to get the box made so i can install them hopefully it'll be out by the hpt shootout in baytown,tx so i can take her out there will post piks as she makes progress. Thanks for all the comment glad you'll like the way its turning out

Thanks and I got most of the claddings here locally from a guy parting out his ss and some in houston on cl and yes your going to have to modify them your going to have to make the rear door longer and rocker and make the bed piece in front of the tire shorter I think theyres some piks of when I was building mine so you can get an idea.

heres some clean piks of my crew cab ss most of the other piks she was dirty here she is at a friends house next to his lightning clone hes got some plans for his also bigger billets and deep dish and double sunroof and some other stuff comments welcome and heres some piks of the 69 I'm building plans are ls swap w/turbo on billets my 345/25/20 toyo tires in and 20x12 wheels and wilwood brakes heres some quick pics. some more tubs Left(wide)right (stock) 6.0 this is where shes going to sit moreless more parts well been trying to finish my crew cab ss and havn't really worked on the 69 but heres some piks of a 67 front end I found and some other parts that I've ordered for her heres some piks of the control arm I ordered have some more parts just wasn't able to take piks of them plans are to run qa1 coilovers on all 4 corners sorry for all the piks

thanks everyone for the comments and no im not boosting on this one as far as the set up goes its a 6.0 aluminum block w/p&p ls3 heads fully bolt on with cam and all arp bolts thru out fully built tranny with 4k pi multi disk stall rear end still has the stock g80 on 3.73s never got to mess with it but I dont plan on running this one anymore to low and plan on adding a cut thru box for the system,but im building a 69 c10 with a 6.0 and planning on turbo for that one i got some 20x12.5 racelines on 345/25/20 tires for that one ill post piks when I get back 2 my computer got a whole bunch of parts waiting for that one but working out of town so its on hold till I get time to work on it

Thanks for the comments

Well went home this past weekend for christmas and installed the 2nd sunroof on my truck heres some quick piks

no sorry not yet i'm working out of town right now truck is at home in the garage till i go back out there i'll probly send the interior to be redone, I got the other sunroof waiting so hopefully when i go down there for christmas i'll install it and one thing less to do

Well hadn't posted any updates on my truck but I finally went ahead and pulled the trigger on the 22/24 deep dish intros heres some piks of how she sits as of now still have a lot of plans for her. Comments welcome Plans 1.red n white leather interior 2.2nd sunroof in rear 3.cowl hood 4.cut bed and install (4)12's in bed 5.oem ss bumper and cluster 6.repaint it all and throw some pinstripes on the hood and tailgate 7.tub the front and drop it about another 1-1 1/2 in the front heres some piks of when I took her apart to when I put her back together piks might not be in correct order trying rims on while rearend was getting narrowed to get an idea of how she was going to look like coming back from mounting the tires on the rims and picking up the bed finally coming back together installing the bed back on the truck finally drivable reinstalling the claddings on bed at the muffler shop getting the crossmember cut driveshaft was rubbing sitting next to my little brothers bagged single cab finally driving her after like a month or two of being taken apart some more piks

I have a spare left from my crew cab conversion its only the drivers side brand new hasn't been painted its already cut so it will only fit on a single cab conversion let me know was looking to get 75+ shipping

Thanks,Matt you didn't have any problems with those mounting your engine since I see they dont have any adjustment, let me know so I can go ahead and order them thanks once again.

You dont have a link or wat do you type on ebay Matt yeah I saw those Doug thortly but they're like 600 i think and the f body stainless r like 200shipped on ebay and they're 1 3/4 I saw that they fit on 67-72chevytrucks.com but u have to modify them alittle where the lower a arm goes on the drivers side and I think the first tube on the pass. side hits depends on wat engine mounts you use.