Jump to content

danny68ss

Member
  • Posts

    157
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by danny68ss

  1. Do you have the springs and retainers
  2. I would like to run a comp.xr265hr 258/263 I know I have to change springs but do I need any other head modifications .
  3. Looking for something like comps zr265hr 212/218 558/563 115 lsa
  4. Mr.P answered the question I asked. I am taking your advice I'm checking onto different can choices now when I decide on a can I can get a converator to match it. I don't have it figured out or I wouldn't have asked for advice which I have gotten and taken but when I am asked a question about what I have I'm not going to ingnore them .I would love to be able to run 7s without nitrous. I am taking your advice and that of anyone else who can help and I thank you for it.I'm sorry if what I've said makes you think I know it all.
  5. It's a snow performance no window switch just waiting for 3000 rpm to open it all the way up other than transmission changes the computer is basically stock.I had the timing turned retarded 6 degrees but returned to stock when I added the methanol. It runs 1.7 60 ft times now at 8.09
  6. Adding methanol is like running really high octane gas I believe it's like 110 octane and it's supposed to be much easier on the engine when running nitrous I'm still running stock timing with no valve rattle a the plugs look good. The truck has plenty of power to pull my boat without a supercharger although I would like to have one. I already had the nitrous system and a filling station from my other car.but I love going to the local drag strip and out running mustangs and camaros is why I like to play with the truck.
  7. Ok that's what I was wanting to know about the nitrous. I am planning to change the can it has LT headers and flowmaster mufflers I would like to change the convertor but I pull a 28 foot cabincruiser don't know if I still could still tow it with a higher stall .on the fuel pump what would you recommended it's a 04 if it makes any difference I'm running methanol injection when the nitrous is on.appetite all the help guys.
  8. I know I'm pushing my luck as it is and the transmission will give out soner or later but it's not my DD. If it goes out it can be fixed I was just wondering if anyone had ran 200 on a stock engine I don't want to loose a engine I'm going to. Get a transmission built anyway I'm trying to get into the 7s in the 1/8 mile I don't need much more to do it a extra 50 and a little better rection time I think I can do it.
  9. Transmission is stock right now I've ran 3 bottles through it without any issues so far but I'm sure it's just a matter of time before it lets go.
  10. Anyone tried running a 200 shot on a stock engine.I'm running a 150 now with no trouble so far.
  11. Ok I thought it was pressed on but wanted to make sure I guse it is a defective pump I replaced it when I done the fans.thanks for the input.
  12. Has anyone else had their water pump pulley fall off after installing electric fans on a 04 ss? Or did I just miss something it was fine for about 800-1000 miles.
  13. Thanks I'll check it out.
  14. Does anyone know where I can find a SilveradoSS SS hat I've looked everywhere with no luck.
  15. Hey anybody have the small step pad that goes in the middle of the rea bumper or know where i can find one cheap.
  16. Do they fit good?Thinking of ordering a set
  17. Got my harness today put it on it works great nice harness.
  18. Need a kit 04 ss like to have at least 100 HP
  19. I ordered a blackbear harness last Thursday hopefully get it soon.
  20. I am going to go with the blackbear harness everyone seams to have good things to say about it.
  21. I had it running AC on about 200 degrees. I wired a relay up to and checked for power it seams to be working. I'm going to make a harness today I found a diagram on performance trucks.net Looks pretty easy I have all the GM relays. If that don't work I'll try to get ahold of blackbear again.
  22. ok i put the pins in the pcm 42 33 they both show ground i thought it would only ground when the ac was on or the temp was high wanting to make sure the pins worked before i ordered parts they are suposed to be turned on already had it done
  23. Trying to get ahold of blackbear to order one .
  24. Yep blackbear has them. Thanks
×
×
  • Create New...