danny68ss
-
Posts
157 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by danny68ss
-
-
Has anyone else had their water pump pulley fall off after installing electric fans on a 04 ss? Or did I just miss something it was fine for about 800-1000 miles.
-
Thanks I'll check it out.
-
Does anyone know where I can find a SilveradoSS SS hat I've looked everywhere with no luck.
-
Hey anybody have the small step pad that goes in the middle of the rea bumper or know where i can find one cheap.
-
Do they fit good?Thinking of ordering a set
-
Got my harness today put it on it works great nice harness.
-
Need a kit 04 ss like to have at least 100 HP
-
i bought the whole harness at junk yard for $50 you should try your local junk yards and got fans for $150
I ordered a blackbear harness last Thursday hopefully get it soon.
-
I am going to go with the blackbear harness everyone seams to have good things to say about it.
-
becareful with this as this could end up frying your PCM... the PCM is only designed to ground a very low amount of amps/voltage. It doesnt take much to ground a relay.
How did you test this? was the engine at operating temp... A/C on...
I had it running AC on about 200 degrees. I wired a relay up to and checked for power it seams to be working. I'm going to make a harness today I found a diagram on performance trucks.net
Looks pretty easy I have all the GM relays. If that don't work I'll try to get ahold of blackbear again.
-
Sorry for even saying anything... Blackbear
Go to the link on the left hand side of your screen. Order it right online
ok i put the pins in the pcm 42 33 they both show ground i thought it would only ground when the ac was on or the temp was high wanting to make sure the pins worked before i ordered parts they are suposed to be turned on already had it done
-
Trying to get ahold of blackbear to order one .
-
Yep blackbear has them. Thanks
-
Is the one on there. A two pin?
Happen to know the price I looked on their site and didn't see it?
-
Happen to know the price I looked on their site and didn't see it?
-
Does anyone make a duel pin harness? I found a couple of single pin ones but would like to have it work like factory.
-
I was just wondering why his stock 154000 mile truck seams so much more peppy than my ss that is the biggest difference I can see
-
Did that take care of the lag?
-
Has anyone changed from drive by wire to drive by cable. My friend has a 01 5.3 4.10 gears. It seams to run a lot better off the line than my ss I was wondering if it was due to the dbc
-
Has anyone changed from drive by wire to drive by cable. My friend has a 01 5.3 4.10 gears. It seams to run a lot better off the line than my ss I was wondering if it was due to the dbc
-
Here is "everything"
The radio though, I think your going to have to find a "unlocked" one because they connect to your vehicles VIN for security reasons. I debated on doing the "factory" upgrade in my truck, going to the LUX radio with Nav, etc. I just ended up doing a nice Alpine 7" IXA-407 for 400 bucks and another 200 for install and PAC adaptors. There is a co tss-radio.com that sells the adaptors for if your truck does have the XM antenna on the roof it'll allow you to use it for Sirius (which is the future). What sucks about radios these days is they're not cheap, gotta buy the adaptors for the Bose, adaptors for the steering wheel controls, satellite radio, iPod adaptors, etc. Good luck with whatever route you take
If I had the matching radio could the dealership unlock both?
-
Can you add factory xm radio to a truck that did not come with it . I know where I can get everything but the radio.
-
nope, not needed.
Thanks. I lost the one I found on eBay but I'm sure I'll find anotherone. Figure as it is out of a 03-06 GM it will work wont it?
-
it has the bose speakers 6 disc . but no on star i didnt know if it needed onstar for the navagation
Water Pump Pulley
in Bolt On Performance
Posted
Ok I thought it was pressed on but wanted to make sure I guse it is a defective pump I replaced it when I done the fans.thanks for the input.