Black6spdz

PMs replied, will consider shipping if it does not sell locally soon

He is correct, I live in Rockford just north of Grand Rapids

I am looking to get rid of the transfer case from my 04 ss truck. The truck was involved in a underhood fire so the case has black soot on it. The fluid came out perfect and vent lines were still attached so I am sure it did not get hot. The transfer case has the 4L80E adapter from Time2kill in it that was almost 500 dollars. It has worked flawlessly for me. I also have both drive shafts and crossmember I may sell as well. Looking to get $600 for the transfer case and would prefer not to ship.

SOLD

I am selling the rear shocks off my truck. They are Belltech Street Performance with Belltech shock extenders for a lowered truck. They have less than 1k miles on them and are in great shape. Looking for 100 shipped

it had a 2/2 drop on it, I would have to check on offset

Thank you, I may ship just easier to sell locally sometimes. I have never shipped anything this large.

I am selling some slightly used drag radials from my awd truck so no burnouts and a max of 400 street miles. They are vrock wheels that are 18x9.5. Tires are NT05R 305/45/18 which are just short of 29" tall. These save roughly 20lbs over the stock SSS wheels. I will have current pics up soon. Looking for $700 and would prefer not to ship. Located in Grand Rapids MI Also this is just for 2 wheels and 2 tires that are perfect shape.

Kind of a long story but the truck is no more. I will post some videos shortly, truck ended up going faster yet with a slipping trans.

I am selling the OEM wheels off of my truck. They are in very good condition except for a small mark on one of the wheels. Tires are excellent as well. I no longer have my truck is the reason for the sale. I would prefer not to ship them. link below has pictures. I have some on the truck as well. 1,000 to someone on here. https://grandrapids.craigslist.org/wto/5253328610.html

I am selling brand new in the box lowering hangers, part number eh2504-2 . I purchased these for my 04 SS, however my plans have changed and no longer need them. I believe I paid around 140 plus shipping. Asking 110 Shipped

Very open ended question really but with race gas an about 20lbs of boost my truck made it into the 10s at almost 130mph. I had just a cam, springs and pushrods, no head studs no rod bolts etc.

Will do, probably be selling the long block, fuel system, turbo and intercooler, and converter

Made by Vrock. Soon to be forsale with less than 300 miles

Thanks for the interest, I have decided to keep the truck and will probably be demodding some.

Yeah the truck went 10.9 at 129 with a stock motor. All I did was change the camshaft. Never had the heads or oil pan off. Stock bottom end usually people are referring to stock crank, rods, and pistons. There are time slips and video proof in the other part of the forum. I just never got added to the list

if you look through some of my threads I think there are a couple videos, honestly It is a fairly simple set up and has been very reliable, I pulled a 23ft boat with it up until last year

I have owned the truck for 4years and it was 100% stock when I bought it. I daily drove it for a while and honestly just dont drive it much now at all. It has never seen a winter so there is no rust. Just trying to see if there is any interest in the truck the way it is or I may demod it some and keep it. The truck has black leather and bose with a 10" sub under the rear bench. The truck currently has 90k motor and turbo have less than 3k. Here is a quick rundown of the bigger mods. KB racing turbo set up JGS 50mm wastegate Forced inductions Billet S480 Big Treadstone Intercooler Baker Engineering Forged 370 Callies rods Diamond Pistons 1/2" Head studes All ARP hardware Tick turbo cam BTR dual springs and titanium retainers Hardened push rods msd 2 step full mandrel 4" with stainless magnaflow and cut out Fuel 127lb injectors twin 450 in tank pumps (1 on a hobbs switch) E85 Converted to return set up 4L80e Trans Billet circle d converter Red clutches and other hydraulic mods Tru cool 40k cooler lock up switch Truck is lowered 2/2 and I have hangers for the other 2" in the rear. Brand new belltech shocks installed. 13" front rotor upgrade Brand new 18"x 9.5 wheels with new NT05rs Stock 20s powder coated black with nearly new Nitto 420s I am sure there are many things not listed but that is the basic rundown. Just seeing if there is any interest as I am currently looking to get back into a cts v. Truck is currently the fastest SSS and if I can get to the track this weekend should be making a 9 sec pass. Thinking around 28k with everything including many stock parts. The truck has had a full paint correction and never an auto wash in my ownership. The truck is making well north of 1k horsepower with boost turned up and driven normally on 700rwhp and 17lbs.

yeah it is good to go. going to try to make it to the track saturday.

18x9.5

Here they are, finally. Saves 21lbs per corner over the stock wheels and tires.

Could just be pinion bearings in the rear too. With awd the stock 10 bolt seems to do ok. I have done nothing but change the fluid in mine

haha that is awesome, I will soon I havet he transmission out of it right now but shouold have some pics next week and hopefully a new time slip soon, then maybe a forsale ad.

Finally got the wheels, Wheels with Drag radials weight 58lbs, stock with tires weigh 87lbs. This alone should help a bit.

I think I have made up my mine on a street/track set up. Wheels are 18x9.5 tires are 305/45/18. Should make it so I don't have to spin it 7k thru the traps with the tallish tire.