Justin Lamanna

if anyone needs a k&n breather to be used with the catch can ( it replaces where your oil fill cap goes on your passenger side head) let me know. i have a brand new one that i had for my truck and never used. paid $50, will ship for $20.

Man, i thought his car was bad last time you posted detailing it, this time around it was way worse. Good job, looks great.

congrats

that car is suppose to be in ocean city, MD this weekend for the "crusin ocean city" event. I saw his post on corvetteforum.com, i know there are a couple people from this site going, i'm leaving tonight so hopefully i get to see it in person sometime.

you better be taking the SS. there needs to be at least one fast SSS there. My car has never seen the rain yet and it's going, every year it calls for rain, sometimes the weather people are right but most of the time there not. My car is looking better than the day i picked it up from the chevy dealer and I'm driving from Pittsburgh, hope to see your truck there.

Where leaving Thursday after work. Here's our group of cars so flag us down when you see us on the streets: I'm going with my vette, black with tinted windows. There is also a black GTO with tinted windows going- CCW wheels and a Silver TBSS with shaved doors and rear hatch with c6 door handles

CHASE- keep in mind that this tach will not rev as fast as your new engine will.

i have and liked the results

a little over a week away..........

great photos, thanks for sharing. Any videos?

thanks for all your input, i have narrowed it down to 3. i am leaning towards the escort 9500ix.

do you mind if i stop by to check it out, i'd like to get a house next year and this woudl be a good starting point if thats cool with you. where down that way at night watching everyone throw water out for burnouts.

sounds like a good place to meet. who is renting a house while they are there? we have been staying at the Holiday Inn the past 5 years and wanted to look into the houses on the lower streets, does anyone mind if i stop by one day to check it out and gets the renters name for next year and the available units they have. thanks!

I am looking into buying a radar detector, anyone have good/ bad experiences or recommendations they could share with me? Thanks

a bigger cam and rockers will make a lot of valve train noise.

congrats!!!!!!!!!!

Anything wiht the name Lingenfelter on it is not worth it, IMO.

there was supension work, and over 300lbs of removed weight along with some other things for that car to run like that. non the less very impressive.

here's the full report for anyone interested: http://forums.corvetteforum.com/c6-corvett...our-report.html ranger's write up: "Our Impressions of the ZR1 on the drag strip A fabulous car, that’s hard to drive well for max acceleration. That’s why the car magazines haven’t shined with it. The torque of the motor is huge, presenting a challenge to avoid excessive wheel-spin. The solution involves heated tires and a progressive throttle-squeeze in first gear. But loss of momentum via bog has disproportionate, adverse impact on the 60’, 330’ and ET. GM set the ZR1 first gear ratio at 2.29 vice the Z06’s 2.66. That difference looms large in making torque at launch somewhat more manageable and allows the ZR1 to reach 67 before the shift. But it penalizes a loss of momentum more in the ZR1 than in the Z06. The car has a different rpm-making rhythm than the Z06; its rev limiter is at 6600 vice 7120. So a driver transitioning from the Z06 needs to eye the tachometer earlier than the engine-sound indicates. Clipping the limiters extracts an ET penalty. Slamming the limiter drop the car’s nose and kills the ET. The ZR1 transmission is a pleasure and shifts positively with little fanfare. Perfect. As always, proper hand position is still a must. The clutch engagement point is in the top-third of travel rather than the middle-third on other Corvettes. That requires getting used to. On ZO6Jeff’s car we changed the clutch fluid in the reservoir (three swaps) after pass #10 as a prophylactic. It was seriously nasty from infused clutch dust after starting the day perfectly clean. We repeated the three-swaps at pass #20 before mounting the drag radials. Again it had turned very nasty; but three swaps did the trick. I was very impressed with how stable and planted the car was under max acceleration. If you replay the video of the two 10-second passes, note how straight and true the ZR1 remained with only minimal movement on transitions. It behaved the same way for me on stock tires. I like that. It quickly gave me confidence going down the track. Finally I was impressed by the robustness of the car under hard running. Nothing broke; nothing felt weak. I had no wheel hop in my 11 passes. The clutches held up. But they do produce smoke through the center tunnel exit when intentionally slipped excessively. But unlike the LS7 clutch, the LS9 dual-disc did not glaze even once. I am happy to see GM has resolved that annoying issue. Now that I’ve driven both the ZR1 and the Z06 on the same day at the same track, which car is faster? The ZR1 for sure. It feels faster. It is faster. But it’s harder to launch without a loss of momentum. Still, post-launch, the very wide flat power-band of the ZR1 is unforgettable. And of course the exhaust note at full song, sounds like a genuine race-car. Sweet is an understatement. Just re-watch my 10-second-passes in HD widescreen with the volume cranked. That exhaust note is mesmerizing. It's like you are there. On my DR passes, a slightly more aggressive launch would have put the car into the 10.8s at a 600’ DA. I suspect some owner will get a ZR1 into the 10.60s on DR and the 10.8s on stock tires. racerns came very close to 10s on stock tires and would have been there with better shifts or the same DA we has at the start of the day or in a car not thoroughly heat-soaked from a long drive to MIR and so many passes. I must note that zosix427 drove seven hours to reach MIR; made 16 passes; and then drove seven hours home to honor business commitments at first-light the next morning. He’s a true car guy and racer who’s already done the driver-mod and wants to improve even further. He set a series of PRs in his ZR1 at MIR and will be knocking on tens in the fall with more seat-time. I forgot to mention to him (but will here) that as I was preparing to do a burnout on a pass in his car, On-Star called with a status report. I showed “mature judgment” in ringing off that call before spinning the rear tires to copious smoke. That was but a small token in return for the opportunity to make three passes in his ZR1. I extend once again my thanks to ZO6Jeff for the opportunity to join his son racerns in help wring out the ZR1. I know they will continue to drive the car in the full spirit in which GM unleashed it on the Corvette Faithful…often and at various racing venues. Also want to thank Chris for shooting the 62 videos of our activities at the event. Great job once again, Chris. Thanks, as always, go to Massimiliano for the use of his music. The owners and drivers of these two ZR1s will be happy to entertain member questions. Post away. Best to all. Ranger "

ranger, the same guy who did those times made a bunch of passes in a zr1: his best was 10.95 the conditions were not a exact match but IMO its not worth the extra money for a zr1 if your going to use it for drag racing.

it was sent to me as well....

lookin good !!!!

i know a couple members on this site are running wider wheels & tires in the rear. hopefully they will chime in here to help out more.

Nice job on the truck!!!!!!

here's a nice ZR1 also: http://www.youtube.com/watch?v=w7D0gKdKRJ8