RebelOne

It'll probably fall in half if they hit a big pot hole

Well, the air/fuel ratio gauge is what is says. Mainly used on heavely modded engines so they wont lean out their motors. Changing just the intake filter wont gain any noticable power, but is better than stock.

I just did mine a couple weeks ago. Didnt really smoke that bad, so I guess the engine is pretty clean.

I have the magnaflow DI/DO and it has an internal x-pipe in the muffler.

Anyone know the part number for the red 8.5mm wires? I've been calling a couple companies, and nobody knows if they are red. Any info?

I will try to upload some photos

One way to stop the CEL more a couple months at a time is this mod called GOTTS o2 modd. Look it up for all the directions. I did it on my F150, worked 2 months at a time, then I just disconnect the battery and the CEL would go off. It using spark plug non-foulers and screwing the rear o2 sensors on them and it makes it where the 02 sensors think you have cats due to not a lot of exhaust gasses hitting them. Costs about $15.00 for 4 non foulers. Please look it up, works great!!!

My friend use to gut his cats. You'll still get some codes and CEL, but, it's just like running no cats, makes it louder. Don't know about making it run better since your computer is gonna make you run rich or something.

Should I get the TR55IX?

Well, its time for my 03 SSS to get plugs and wires. I heard NGK TR55's are great plugs, but which ones do I get? Also what's the recommended gapping for these motors these days? I also want Taylor wires, again, confused on which to get. Stock wires are like 7mm, should I get the 8mm, 8.2mm, 10.4mm? Please, help is greatly needed. Thanks

One of my courtesy lights wont turn on. Anyone know what might be the problem? I changed the bulb and still got nothing.

Looks like they cut off the silencer. Its no big deal man.

Does the bike seats give you more down force like a spoiler? LoL

I read on F150Forum.com that the eco boost f150's are having major troubles in 6th gear. I would stay away from that trash

Has anyone ever painted their plastic intake tube? I want to paint mine the same color as the truck, just wondering if anyone has done it or how much it would cost for someone to do it.

Well guess there isn't much of a difference between the two. Guess ill get the aluminum one and powder coat it. Thanks for the help yall

I'm planning on buying a CAI in the next week or so. My question is which is the better intake between the two? Any help would be great.

I run 50 PSI in my tires

The vents are only there for appearance. You cant even see my fogs until your up close and at night the lights have to be on to see them. Didnt modify the vents in any way or take out the mesh inserts.

I did not cut the vents, just made the brackets to put the fogs behind the vents

Finally for my fogs installed. Huge PITA, but well worth it. 6K HID kit is next