chawkins6789
-
Posts
2,131 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by chawkins6789
-
-
Ok. I found GS calipers for $1500 new. not sure how I will do it, but it will be pieced together. I cant do a drop until I decide what tires and when to get them
-
I am looking into the Z06 brackets, GS silver calipers, and was curious if they will all fit with lowering spindles and 20' replicas? Eventually I will change the wheels, but will be keeping a 20" with 275/40R20's
-
Some of you went to the last one, if you want to go to this ears let me know. I am organizing it with GM-trucks.com. I am not on here much so PM me or text at 661-241-0891, or email at [email protected]. Here is the thread there http://www.gm-trucks.com/forums/topic/172848-central-cal-la-area-meet-june-13-2015-castaic-lake/
-
You need the new wheel, clock spring, and 2 things programmed. The BCM has to be programmed to accept redundant audio controls and the cluster needs to be programmed for the enhanced driver's information center. I did it a couple years ago. It is pretty easy, but there are a lot of plugs. A couple of them arent the easiest to access. Be prepared to go elbow deep in the dash. It took me about 3 hours to do while taking my time then a morning at the dealer and paying them $145. with the programming, make sure your service advisor knows the process. Some dont understand programming in options your truck didn't originally come with.
-
Those are easy to sell and hard to track.
-
Maybe take the 112 off and bring it up this way
-
With long tubes, i dont think a shop wants to be involved
-
Those were what came on 05-06 Denali's.
-
That pipe is a pain in the ass to cut. I tried with an angle grinder. When i got out the sawzall it went by fast. I would not attempt with a hacksaw
-
Buy one that fits and find a friend with a welder.
-
In T/H your tahoe will blink 6 timesMy 06 doesn't do it but my 07 Tahoe does so I know what you're talking about.
-
Did you call Summit? I have had great experiences with them and i ask a lot of questions prior to ordering
-
I would definitely order from them again if they carry the wheels i want.That shop is down the street from me.
Kevin, I say go for it. Get them and from them
-
That is the one and the place i got my set from
-
EoTech isnt cheap. My non NVG one was about 550Thanks everyone.
Thanks for the info going to look at some Eotech today.
-
02-04 were ext cab, LQ4, quadrasteer. 05-07c were LQ9 and crew cab. 02-07c were only offered in AWDEarly gen. Denali had LQ4 and some had 4Wheel Steering IIRC
-
Auto 4 speed to manual 5 speedWhat is an a4 to m5 swap ?
-
On that sticker only the last 8 are present i believe. They cant see by the sticker that your truck says 2GCEC19N or 2GCEK19N. The emissions info is the same for all models with the 187 fed emissions and then the dofferent standards for the 188 California emission vehicles. The only differences in those 2 is that California has 4 catalytic converters instead of 2
-
thanks for that your awesome. yea i can read some of it but a little blurry, if you would'nt mind trying another tomorrow, i hope that it being 4wd isnt a problem for them who knows. thanks
You cant tell on the sticker if it is 2wd or 4wd unless you run the vin
-
Wow the 10 spokes(or 5 split) are nicer than the past 8 spoke(or 4 split) that were offered before.
LT or LTZ? And is it the gasser?
-
Mine did not change with a tune from Black BearI know that when you have your PCM Tuned by some tuners it will change. At least it does on Black Bear Tune. They might be able to give some insight toward your question.
-
Open a case with BBB and contact GM customer service
-
So i missed that in the read. I'm looking for a grey set.
-
Color?
Z06 brakes on Belltech or McG spindle??
in Suspension & Brakes
Posted
I have been back and forth on arms because I am also looking into coilovers