[New interior lights]

Looks sweet! But I can't handle blue lights they make me nervous.

[Yah or nay]

Not worth 7500 IMO

[Park/Drive to reverse clunk.]

How many miles on it? Mine has about the same amount of slack in the t-case. Pull the plug on front diff and check for chunks of metal or lager than normal shavings. I may be wrong but the way the coupler in the t-case is designed will cause it to have some normal slack. Someone correct me if I'm wrong. I think what you have is normal wear on the gears, bearings ect. I wouldn't really worry about it myself. Until you have whine or other harsh noises. Something else you might want to try is get all four wheels off the ground and put it in drive and go under the truck and check it out.

[Lack of power]

I'd only use it if it was slipping.

[Lq4 vs Lq9 visually]

Pull the heads. There might be a vin on the motor? I'm not sure tho.

[Racestars are finally mounted!!]

They looks badass! I would never take them off. What's the part number on those rims and tire size if you don't mind me asking. I've been looking at those rims and can't figure out what I need.

[Wheel bearing problems]

What brand?

[Lack of power]

A standard rebuild on a RWD 4L65E is gonna run you $1500-$1800 with labor and a reman TC.....

dam that's a lot. I can get a good built transmission for that.

[Park/Drive to reverse clunk.]

Mine dose the same thing. I think it's some what normal after a few thousand miles of wear. Most trucks I've drove in 4wd do the same thing. Could be a matter of several things get a little play or wear in it. Causing it to have some slack.

[Stall before cam?]

I guess I'll wait on a shift kit and servos before I'll install it.

[Lack of power]

Prob be better to find a used one. But my guess would be around 600-1000 maybe I guess it really depends on what all it needs. A used one with low miles could be had for 450-650.

[Lack of power]

Try some Lucas.. It worked wonders in my jeep

[Stall before cam?]

Well I picked up a slightly used yank ss 3600. I was wondering what you guys think about installing it before my cam swap. I won't be doing my cam swap for a while. What mods need to be done to the transmission before install besides a big cooler? I'd like to get this out of the way first since I don't want to tackle two big jobs at once.

[Lack of power]

If the first fluid change made it worse . I don't think I'd change it again. Take it to a transmission shop and let them check it out.

[Lack of power]

Yeah man I'd say you will be needing a tranny. I'm not 100% on that. Maybe some of these other guys will chime in.

[Lack of power]

Did the fluid smell burnt and what did the fluid look like? Sounds like a bad tranny to me.

[Finally getting my "Super Beater"]

I've never seen a plug that looked that bad.

[Help me chose a cam]

Do you run pump gas on 11.5 cr? I'm thinking of having my 243 heads milled to 60 cc.

[Roll pan Group buy]

Any updates on this?

[Asking a girl out?]

Find out her name and talk to her on Facebook. Before I got married that was the best way for me to talk to women.

[Who needs cylinder head help?]

I'll let you have a go at mine depending on price and turn around time. There the 243 vette heads if that makes a differnce

[Kicker subs, box, amp and wiring.]

What esle you got I don't care to much for a 380

[Kicker subs, box, amp and wiring.]

What kind?

[Kicker subs, box, amp and wiring.]

Come on guys make me a good offer. This is really a nice setup.

[New front diff, metal shavings already]

That's normal wear.